|
- Min Order : 1 Set
- Supplying Ability : 20 Set / Month
Universal Tensile testing equipment is the double columns pulling and pressure testing machine, which is suitable for testing the physical property of rubber, plastic film, composite materials, sof...
|
- Min Order : 1 Set
- Supplying Ability : 20 Set / Week
It is used to measure the MFR value of melt flow rate of various plastics and resins in viscous flow state. It is not only applicable to engineering plastics such as polycarbonate, polysulfone, flu...
|
- Min Order : 1 Set
- Supplying Ability : 50 Set / Month
Plug Bending Tester is applied for bending endurance test for wire connected with plug.This device is designed a...
|
- Min Order : 1 Unit
- FOB Price: 4000 Unit
- Supplying Ability : 10 Unit / Month
These table top densitometers display transmission density and density difference. The TBX***0 also calculates positive and negative dot areas. Single-Step measurement of Transmission Optica...
|
- Min Order : 1 Piece
- FOB Price: 480 Piece
- Supplying Ability : 600 Piece / Month
Strong Universality RF Admittance Switch Anti Adhesion Industrial Applicatons High And Low Temperature Resistance *6GHz RF Admittance Switch By Foam Widely Removable...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The Combined test stand is used to carry out leak tests on pipe connections while they are going to have some mechanical force application for bending and crimping of the joint. It is used for test...
|
- Min Order : 1 Piece
The test method is based on pyrolitic decomposition of the material in an inert gas ow nitrogen . According to ISO ***4 , ASTM D ***3 , maximum temp ***0C, quarts tube, rotameter for N2 gas flow...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The MFR Tester used to determine the material output from 2.**5mm diameter hole in specified loading and temperature condition. According to ISO ***3, ASTM D***8, temperature up to **0C, 7 inch tou...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
Two column and 4 column type, ball screw mechanism, servomotor controlled, in requested load capacities of *0KN, *0KN, *5KN, hard chrome plated guid shafts, computer controlled, reporting in micros...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Plant / Month
Impact testing is used to determine material behavior at higher deformation speeds. AHP offers a wide range of pendulum Charpy/Izod impact testers for tests according to the relevant test standards...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The universal tensile tester is used for performing tension, pressure or bending tests. The classic application is the tensile test. This involves subjecting a sample to an increasing tensile load ...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
Before starting the test, choose test method, and estimate an initial mass and m. Start the test. If the first specimen fails, decrease the mass of the falling dart by m. If the first...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
DSC for determining the oxidation induction time for polymer pipe and protective pipe systems as well as moulded elements made of polyole n. Suitable for OIT test and Melting point determination A...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
AHP manufacture a range of laboratory roto-molding machine for compound manufacturers research purposes to study mold melt flow properties. computer controlled system, data recording and gra...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
Full Notch Creep Tester*2 NCT- Tensile Creep Tester FNCT is widely used method to classify polyethylene materials in regarding to their slow crack growth behaviour under accelerated conditions. Con...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
According to ISO ***7 , ASTM D***8 and ASTM D ***9 , European pump , sensors and valves, *9inch display, report out in WORD, manual charge and discharge, automatic pressure control, pressure rate c...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The falling weight tester is used to determine the external impact resistance of thermoplastic pipes using the staircase or round-the-clock method according to EN**4. According to EN **4 , EN ***1 ...
|
- Min Order : 1
- Supplying Ability : 10 Piece / Month
The internal pressure creep test is a test procedure for determining the strength of thermoplastic pipes. The samples are subjected to a constant hydrostatic internal pressure at a constant tempera...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The temperature cycling tester is designed to determine the resistance of thermoplastic pipe network and connections consisting of stiff or exible parts to alternating thermal shock. This applies...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
The RCP tester conveniently and accurately determines the critical pressure and critical temperature for rapid crack propagation in PE pressure pipes. According to ISO ****7 , motorized height adju...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
ElectroFusion fittings are specifically designed for reliable, high performance pipe joining and long system life. AHP offers a diverse range of electro fusion mechanical testing machines including...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
Manual height adjustment, impact head according to standard, automatic release mechanism, anti rebound system, two column guide, electrostatic powder coated paint, special sample holder... Manual ...
|
- Min Order : 1 Piece
- Supplying Ability : 10 Piece / Month
Two column tensile tester, hot air cabin, video extensometer, computer controlled, USB port for computer, software included, ball screw, timing belt force transmission, **0kgf loadcell, *0KN force ...
|
Digital display, internal pump, internal water reservoir, flow switch for safety control, plastic internal tank, used for controlling hydrostatic pressure bath temperature to *0C, used for any test...
|
- Min Order : 1 Piece
2.5 lit internal capacity, temperature up tp ***0C, digital temperature controller, digital timer, ceramic internal chamber, powder coated paint, high resistance heating element, high speed of temp...
