9'' intelligent rear seat entertainment system with touch screen

Product Description

Function of new intelligent headrest
A brief introduction of the function
 
The product is available to car headrest and rearview mirror series products, which supports TTL and LVDS port with high cost-effectiveness. With the help of four-wire resistive screen, it’s able to be operated conveniently and efficiently by fully functional touch. The new intelligent headrest could also display the voice and pictures of real world with a *4 true-color dazzle beautiful UI interface.
◆There leaves universal small-size digital panel TTL (INX *0Pin, Hancai *0Pin) and LVDS ports
◆Supporting maximum onboard small-size LED backlight driving circuit of ***0****0
◆multi-channel signal , ***0p HD signal available
◆built-in audio processing module, Balance, treble and bass adjustment are available
◆3D video decoder and LC separation, colorful and clear images
◆all standard television signal reception
◆video and audio format tested automatically
◆dynamic luminance adjustment
◆maximum audio power amplifier of2*1.5W(8 Ω)
◆supporting FM audio emission, output rate ranges*7.5～**8MHz
◆supporting infrared light audio emission with the choice of A,B band, audio can be received wirelessly through infrared light emission
◆different languages are available to choose
◆ lower standby power dissipation
◆You can choose digital television mode , which realizes to operate all of the digital television function


使用要求 operating requirement
 ◆*2V电源要求：额定电流2.0A（使用时需参考屏与背光工作电流）
            *2V power supply requirement: rated current 2.0A( refer to the operating current of referred screen and backlight)
            ◆相对湿度 ≤*0%
            Related humidity ≤*0%
            ◆存储温度 **0～**0℃
            Storage temperature
            ◆使用温度 **0～**0℃
            Operating temperature
            ◆整机装配和运输过程注意防静电处理
            Anti-static treatment should be noted in the process of machine assembly and transportation
            ◆整机装配时不要使板卡变形或扭曲
            Don’t distort the board card in the process of machine assembly
            ◆在设定正确的液晶屏供电电压前，请断开与液晶屏连接，否则可能导致液晶屏损坏
             Please disconnect the contacts with LCD before setting correct power supply voltage, or it would damage the LCD
◆驱动板工作时板卡表面不要接触到金属
            Keep the board card surface away from medal when the driver board is at work.
主芯片main chip MST- V*9   输出芯片 chip CHRONTEL***6B-TF