Amperometric Chlorine Sensor MCC1 Made in Germany

Product Description

Chlorine Sensor CC1

sales (at) morwater . de

Chlorine sensor with membrane-covered, amperometric *-electrode system. For the measurement of free chlorine with greatly reduced pH dependence, also in seawater. 


Product description:

• Measurement: NaOCl (sodium hypochlorite), Ca(OCl)2 (calcium hypochlorite), Cl2 (chlorine gas), electrolytically generated chlorine, and organic combined chlorine based on iso-cyanuric acid (tested up to an iso-cyanuric acid concentration of **0 mg/l),

• Calibration: at the controller, via analytical chlorine determination by DPD 1 method. Observe the iso-cyanuric acid concentration when determining the free chlorine.

• Interferences: ClO2 is **0 % detected, O3 is detected,

• pH range: 4 ... *2, greatly reduced pH dependence,

• Pressure range: 0 ... 0.5 bar, no pressure surges and/or fluctuations,

• Temperature range: 5 ... *5 °C,

• Integrated automatic temperature compensation,

• Response time: T*0 approx. 2 min.,

• Flow rate: approx. *0 l/h, low flow dependence,

• Shaft length: standard **5 mm, mA version **0 mm,

• Material: PVC-U, PEEK, stainless steel 1.***1, microporous hydrophilic membrane



Areas of application:

• Fresh water and seawater; surfactants are tolerated in part; a special electrolyte is used for seawater 


Scope of supply:

• CC1: sensor, membrane cap, electrolyte for use in fresh water use


sales (at) morwater . de