AT007 Alloy U disk camera HD720P mini DV small camera

Product Description

This product is a HD video recorder with simple operation or with Motion detection, It can record HD Video,Photo and Audio. elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field.
 

~ Operation Guide
1. Charge
The battery is built-in lithium rechargeable battery, so when you use it the first time, please charge firstly. The method for charging as following:
1.) Use adaptor: connect 5V charger plug with USB cable, then plug into electrical connector receptacle, it can be charged.
2.) Connect computer: use USB cable to connect the computer, then it can be charged.
3.) When you charge it, the Led indicator will keep flashing.When the Led indicator bright, means the machine finished charging.
4.) At this time,if the TF card capacity is enough,the machine can record video about **0 minutes，or can record longer separate recording.
Notice: when battery power is not enough, the machine will enter into protection mode, so it cannot be turn on. Please charge for it.

2. Operation Guide
1) Power on:
Please confirm already insert the TF card in the slot.
Press Start to POWER ON, long press start , the red light lit, enter the standby mode.
No memory card: red and blue lights flash five times simultaneously shut down.
Memory card is full: red and blue lights flash simultaneously eight times shutdown.

2) Mode : each press this once, can be switched to the various operating modes,when the power on and enter the standby mode:
press this once,into->① normal Video mode (power-on default standby);
press this Twice,into-> ② Photo mode;
press this Three times,into-> ③ Audio recording mode;
press this four times,into-> ④ Motion Detection mode;
press this five times, again into-> ①normal Video mode -> ...... (each press one time, the camera to the above order cycle to the next corresponding standby)

3) Normal video mode:
  After power on,The default access into normal Video mode, then red light lit, blue light turns off.
At this point a short press the Start , the red light flashes three times then turns off, start video recording.
In the recording process, press the Start again to stop recording and save the video file. Red light lit, back to normal Video mode standby.

4) Photo mode:
 When in the normal Video mode standby, short press Mode once, the red light flashes once lit, blue light is off, enter the Photo mode standby.
At this point a short press the Start , the red light flashes once, it take a photo, and red light lit, back to photo mode standby.

5) Audio recording mode:
When in the Photo mode standby, short press Mode , the red light is off, the blue light lit, into Audio recording standby.
 At this point a short press the Start , the blue light flashes three times then goes off, into Audio recording state.
During Audio recording, press the Start again to stop recording and save the audio file, the blue light lit, back to Audio recording standby.

6) Motion Detection Mode:
 When in the Audio recording standby, short press Mode , red and blue lights lit ,into Motion Detection standby.
 Motion Detection: Short press the Start , red and blue lights flashes three times,and then dual lamp goes out, into motion detection recording state.
(When motion,it recording two minutes a fragment, whether it have or no recording video, the light are kept off state)
In the Motion Detection recording process, press the Start once, stop and save the video file, then dual-lamp lit, back to Motion Detection standby.

7) In all of these modes, if it is in standby mode, press the Mode once you can switch to the next mode.
If it is not in the standby state, would like to know what the camera is in working condition, you can by a short press Mode once, the corresponding indicator will blink, and the corresponding working conditions are as follows:
 
Normal Video recording: Red light flashes three times then turns off.
Audio recording: Blue light flashes three times then turns off.
Motion detection: Red and blue lights flashes three times then turns off.

3. Power off
Under standby mode, please press Strar about 2 seconds, then release till the led indicator goes out. Then the machine is turned off.

 

~Parameters

ITEEM PARAMETERS
Image Sensor 1/4COMS
Video format AVI
Video encoding M-JPEG
Video resolution HD***0***0P/ HD***0****0P
Video frame rate *0fps
Media playing software Attached software of the operating system or Mainstream audio and video media playing software
Photo encoding JPG ***0****0
Supporting Windows me/***0 XP ***3/vista/Mac OS*0.4
Work time Around **0 minutes
Charging voltage DC*5V
interface type Mini 5 PIN USB2.0
Memory card Micro TF card
battery capacity **0mAh
Battery type High-capacity lithium polymer