Automatic Hydraulic Plastering Machines

Product Description

A. Introduction and features

The machine has solved the defect that previous machines cannot render the top of the wall. It takes only several seconds to fix the machine vertically and flatly and less one minute from the bottom to the top of the wall. Besides, if two people operate the machine, they can render ten rooms (**0 sq) in 8 hours. It can use all ashes including white ash, cement, **6 ash, **9 ash and plaster. The machine uses vibrations-plastering and the thickness can be2.5 cmat a time without hollowness and cracks and shrinking. Catching wall force is far better than manpower.

(1) changing the rope is very convenient. Under the conditions of electricity, if you lift the two wire rope with your hands, how many you lift, how many it will give. If the wire rope is not long enough, you can do like this. On the contrary, raise the plate and pull the wire rope, this can be called roll of rope.

(2) if the plate doesn’t stick the conveyor belt tightly, the conveyor will not send ash and avoid sending ash to the ground.

(3) if there is ash behind the plate, the plate will not lift well. We can press the vibration switch to clean up quickly and lift the plate again.

B. Advantage of Automatic plastering machine for wall

1. New machine instead of handmade in construction plastering area.
2. The capacity is as *5 professional plasterers.
3. The quality is subject to international wall plastering standard.
4. Easy and simple operation
5. Saving more than *0% raw material (cement &sand)

6. Plaster the wall automatically and go up and down automatically.

7. Just only plaster one-time.The thickness of the ash can be adjusted.

8. Easy to move, without removing any parts of the machine.

9. Large capacity hopper,you can put the ash/lime/gypsum in it one-time.

*0. One or two person can operate.