Automatic printing slotting die cutting machine with folder gluer

Product Description

Feeder part 
1、Machine clutch 
1）Electric machine control clutch bell , moving last warning bell ring , ensuring the safety of operation personnel.
2）Drive shaft with a safe clutch to avoid misuse and damage to the machine (the machine is not fixed, the host can not start operation).
3）Pneumatic interlocking device .
4）Host motor start up protection device .
2、Adsorption leading edge Feeder system
1）lead edge feeder institution can greatly reduce clogging phenomenon in the process of cardboard paper.
2）Suction fan auxiliary feeder，make sure the winding paperboard feeding smoothly，The wind volume can be adjusted according to the size of the board.，The maximum guarantee of the vacuum adsorption of cardboard, so that more accurate to send paper.
3）front baffle and back baffle adopt manual adjust gap, feeder lift-right baffle adopt electric adjust gap.
4）feeder wheels adopt polyurethane material made,Large friction and long life.
5）it suitable for 3layers,5layers and 7layers corrugated cardboard, include E flute cardboard.
6）supply paperboard counter，set-up and Display production quantity。
3、dust-extraction unit
1）Equipped with dust removal mechanism ( remove dust brush ), effectively remove cardboard surface impurities , improve the quality of printing .
4、feeding roll
1）out diameter is Ф**7mm。
2）Seamless steel pipe , parcel wear-resisting rubber , correction and balance
3）Lower feed roller chrome plating.
4）feeder Paper roll gap dial manual adjustment, adjustment range ***1mm.
5、Operation control switch (PLC computer control)
1) the control panel is equipped with *0 Inch Touch screen, can control the paper feeding, printing, slotting, die cutting, easy to operate.
6、Automatic zero return device
1）Paper feed, printing, slotting, cutting part of the electric automatic return to zero.
2）In general, the use of automatic paper box to zero device, try to print two can be adjusted to the correct position, reduce waste.
Printing unit
1、printing roller
1）、out diameter is Ф**5mm（include printing plate Ф**0mm）。
2）、Steel plate material, surface grinding, hard chromium plating.
3）、Balance correction, smooth operation.
4）、Fixed ratchet wheel shaft.
5）、Full format plate ditch, suitable for 9mm hanging version.
6）、Loading and unloading printing plate, pedal switch electric control positive and negative.
7）、Printing roller clearance dial manual adjustment, adjust the range of ***1mm.
2、printing pressure roller
1）、out diameter is Ф*55mm。
2）、Steel pipe surface grinding, hard chromium plating.
3）、Balance correction, smooth operation.
4）、printing pressure roller gap dial manual adjustment，adjustment range ***3mm。
5）、Feeder roller gap dial manual adjustment, adjustment range is ***3mm。
3、Metal anilox roller
1）、out diameter is Ф**8mm
2）、Steel pipe surface using advanced electroplating hard chromium technology, hard, smooth and wear-resistant.
3）、Dot uniform, uniform on ink.
4）、Prolong the service life of the plate and rubber roller.
5）、anilox roller gap dial manual adjustment.
4、rubber roller
1)、out diameter is Ф*82mm.
2）、Steel pipe surface coated with wear-resistant rubber.
3）、High special grinding rubber roller, ink effect is good.
5、feeder paper up-down roller
1）、up roller：diameter is Ф1*9mm Seamless steel pipe, with 2 paper feed wheel.2)、down roller：out diameter is Ф*55mm Seamless steel pipe, surface grinding, hard chromium plating.
3）、feeder roller gap dial manual adjustment，adjustment range is ***3mm。
6, phase adjustment mechanism
1)planetary gear structure.
2)horizontal position, manually adjust the distance of a total of *0mm.
3)the printing plate roller adopts frequency converter to adjust the phase, return to zero and adjust the speed of the plate, adjust the version of high precision.
7、Ink circulation
1）、Pneumatic diaphragm pump for ink stability, simple operation and maintenance.
2）、Ink filter, filter impurities.
8、Printing phase fixing device
1）、Pneumatic brake mechanism.
2）、When the stage is separated or adjusted, the brake mechanism is restricted to rotate, and the fixed point of the original gear position is maintained.