Belt Conveyor_Others Equipment

Product Description

Table of Contents
Table of Contents    1
Others Equipment    1
Belt Conveyor    1
1,Overview    2
2,Features    2
3,Technical Specifications    2
4,Application Scenarios    2
Laboratory Cone Ball Mill    2
1,Overview    3
2,Technical Specifications    3
Laboratory Flotation Machine    4
1,Overview    4
2,Features    4
3,Technical Specifications    5
4,Application Scenarios    5
Laboratory Shaking Table    6
1,Overview    6
2,General drawing and main structure    6
3,Technical Specifications    7
4,Application Scenarios    7


Others Equipment

Belt Conveyor
 
Product： Belt conveyor

Type: ZSD series
 
1,Overview
    Belt conveyor is widely used to transport powder, granular or graininess materials in metallurgical, mining coal, building materials, chemicals, power, transportation, grain and other departments. It is suitable for transporting coal, slag, salt, gravel, grain, ore and massive, granular and other bulk materials with bulk density between the 0.5 and 2.5 t/m3 at room temperature.
    The performance of the belt conveyor ZSD***0,**0,**0,**0 belt conveyor is driven with speed reducer of cycloid gear(if needing the oil-cooled motor and JZQ or ZQ gear reducer, please specify when ordering).
2,Features
(1) simple structure, large transport capacity, long distance .
(2) structure compact, light weight, moving convenience .
(3) reliable and easy maintenance .
3,Technical Specifications
          Model
Parameters    ZSD***0    ZSD***0    ZSD***0
Belt Width(mm)    **0    **0    **0
Roller bearing form    Trough roller
Drum Diameter(mm)    **0    **0    **0(**0)
Belt Speed(m/s)    1.2 (model 0.8, 1, 1.6, 2, 2.5)
Convey Inclination(°)    ***8(User provide data when ordering)
Capacity(t/h)    about **2    about **6    about **8
Power(kW)    According to order parameters
Convey Distance(m)    Supply according to user needs
 
 
 
 
 






4,Application Scenarios
Production Scenarios    Production Scenarios    Customer Scenarios
          

Laboratory Cone Ball Mill
 
Product： Laboratory Cone Ball mill

Type: XQ series
1,Overview
    This machine is a newly milling equipment. It is in the nature of high shell rotating speed, inner lining smoothly, high milling medium stowing ratio, many mediums, good grinding and polish effectiveness etc. Compared with the same kind of milling machine, it has stable operation, feeding and discharging controlled by motor, fast and convenient, the time of operating selected, well-distributed of the particle size, small over degree of grinding, high grinding efficiency, small power consumption of each unit of materials.
2,Technical Specifications

model    
 XQФ**0X*0    
 XQФ**0X**0    
XQ Ф**0X**0

 Volume of shell（L）    
 1    
 6.*5    
*2

 Quantity of grinding（G）    
**0     
***0     
 ***0

 Feeding size（MM）    
 *3    
*5     
*5

 Discharging size（MM）    
 *0.**4    
 *0.**4    
 *0.**4

 Shell rotating speed（R/MIN）    
 **2±2    
 *6±2    
*2±2

 motor power（KW）    
 0.*5    
0.*5     
1.1

 Ball load diameter（MM）    
*5 / *0 / *5     
*0 / *5 / *0     
 *5 / *0 / *5 / *0

 Quantity of ball load    
 *2 / *5 / *3    
*0 / *8 / *0     
 *0 / *8 / *9 / **4

 weight of ball load（KG）    
 1.*6 / 1.*6 / 0.*8    
4.*4 / 3.*1 / 2.*4     
8.*3 / 7.6 / 6.4 / 5.*7

 Overall dimension（MM）    
 **0X**0X***0    
 ***5X**0X***0    
 **0X**0X***0

 Total weight（KG）    
**5     
**0     
 

Laboratory Flotation Machine
 
Product： laboratory flotation machine

Type: *9 litre series
1,Overview
    **-liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to *0. It is left-type or right-type according to user’s demand.
2,Features
    Laboratory flotation machine with *9 liters is impeller mechanical flotation machine. It is composed by the following main parts:
(1) Tank
    The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp.
    In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank *5 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice *7 is installed on the tank cover *4, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate.
    Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning.
    The pulp flows into the intermediate tank *5 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover *4 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port *6 is equipped in front and at the back of tank bottom, which is easy to change the technological process.
(2) Impeller System
    Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft *0 and around the vertical shaft tube *2. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover *4. When the impeller rotates, the quantities of air can be absorbed along the vertical tube *2. The protective plate 4 is fixed under the cover *4, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately.
    The hole of vertical tube *2 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft *1 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor *8 rotating through the triangle belt, of which the tension can be adjusted by the nut *9.
(3) Shaving foam device
    Foam is scraped using the rotary scraper along the flotation machine, scraper *0 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer *1 and V-belt.
3,Technical Specifications
Tank size: L*W*H    **5mm×**5mm×**7mm
The effective volume:    *9 liters
The flow of the pulp is calculated according to the production capacity
Aeration rate:    ****5 liters / min
Impeller diameter:    **0mm
Impeller speed:    **9m/s
Impeller circumferential speed:    8.*4m/s
Scraper rpm:    big wheel    *1r/min
    small wheel    *3r/min
Motor    Model    y**0l*4
    voltage    **0/**0V
    Power    1.5KW
    rpm    ***0 r / min
Assembly method:    Left-style
The outline size of machine:    H:**0mm,W:**2mm,L(including 2 slots)***1mm
Total weight:    including 2 slot motors
4,Application Scenarios
Production Scenarios    Production Scenarios    Production Scenarios
          

Laboratory Shaking Table
 
Product： Laboratory shaking table

Type: LY series
 
1,Overview
    LY shaking Table is one of the commonly used equipment to conduct gravity concentration for feasibility study and test of ores for labs. And small beneficiation plant. It is applicable for separations of fine-grained and micro-grained rare metal, ferrous and non-ferrous metal, precious metal, coal and other minerals. It can carry out ore concentration operation independently and also can operate in conjunction with jig, screw separator, centrifugal separator and other equipment. The product is made by the only manufacturer designated by the former Ministry of Geology and Mineral Resources, in compliance with the Industrial standards.
    LY Shaking Table is to make separations based on the difference of specific gravity of feed materials, reciprocating asymmetrical movement and the stratification performance of the inclined table surface in the lateral water flow with obvious zone of the minerals with different specific gravity on the table, hign quality of concentrates produced, convenient operation and adjustment and other features.
    The table surface is constructed of ore sand or slime and is made up of glass fiber reinforced plastic or aluminum alloy.
2,General drawing and main structure
This machine mainly consists of table box, table surface, and table frame.
    1,The table box is hyperbolic link mechanism. When the eccentric shaft rotates, it drives the upward and downward movement of the connecting rod. When the connecting rod moves downward, the toggle plate expands. The toggle plate on the right is supported on the supporting seat fixed with the draw bar while the toggle plate on the left is supported on the adjustable supporting seat(this seat can only move upward and downward),which is installed together with the supporting seat through special bolts. One end of spring is covered on the supporting seat and the other end is covered on the adjusting stud disk above the fixed sleeve.
    2,The belt pulley passing the motor is driven to rotate. It drives the connecting rod and pushes downward the toggle plate to press the spring, as well as pushes the draw bar to carry the table surface forward. When the connecting rod moves upward, it drives the table surface to move backward under the action of spring tension. By doing it, the motion becomes continuous. The rotary motion becomes longitudinal straight reciprocating motion.
    The stroke is obtained through the twisting of special stud. The whole mechanism is put in the shell of table box.
    The bed surface is installed on the two cast iron beams. The beams are fixed on the sliding bearing and the bearings are fixed on the angle iron frame.
    There is inclination angle for the table surface horizontally which can be from 0°to *0°.
    Adjust the horizontal sliding bearing and hand wheel in the middle. At the one end of the hand wheel shaft which match the nut with arc groove. Such nut matches the connecting rod fixed on the draw bar. When the hand wheel turns to the direction of nut, it drives the rotation of connecting rod, draw bar, and table surface.
 
3,Technical Specifications
Model    LY***0×***0    LY***0×***0    LY***0×**0
Bed size    mm    ***0×***0×***0    ***0×***0×**0    ***0×**0×**0
Stroke    mm    6～*0    *2～*8    9～*7
Frequency    t/min    **0～**0    **0～**0    **0～**0
Angle    0    0～*0    0～8    0～*0
Feed size(sand ore)    mm    ≤2    ≤2    ≤2
Feed size(slime)    mm    ≤0.**4    ≤0.**4    ≤0.**4
Feed density    %    *0～*0    *0～*0    *0～*0
Capacity(sand ore)    t/h    0.4～1    0.4～0.8    0.1～0.2
Capacity(slime)    t/h    0.3～1.5    0.3～0.5    0.*5～0.*5
Water consumption    t/h    0.3～1.5    0.2～1    0.1～0.5
Power    kw    1.1    1.1    0.*5
Size    mm    ***5×***0×**0    ***0×***0×**2    ***0×**0×**0
Long×Wide×Higher                
Weight    kg    **0    **0    *0
4,Application Scenarios
Production Scenarios    Production Scenarios    Production Scenarios