Bengraphic F3-330 inline flexo printing press

Product Description

1 Press Highlights
*Servo-driven,remote check & upgrade,
*Short web path,
*Quick changeover without tooling,
*Quick set-up, pre-registration & pre-impression
*Hot air or UV drying,
*UV rotary screen printing is an option
*Cold foil,
*Rail system for portable cold foil/screen,etc. ,
*Record the data of different materials,
*Turn bar, delam/relam, diecutting,sheeting&laminating,etc. ,
*Chilled plate is basic option,air cylinder locked ink tray, separated anilox with ink pan,
*This press is used for PVC/PP/PET film,AL-foil,Paper/Film PS label,*****0g paper.
 
2 Specification
Speed **0m/min
Web Width **0/**0 mm
Repeat Length ******2mm
Max. Unwind Diameter **0 and/or ***0 mm
Max. Rewind Diameter **0 and/or ***0 mm
Max. Units *2 Units
UV Curing Power **0w/inch
 
3 Features Introduction
*Build-in full servor driven system offers more capabilities which makes the operation much easier,stable and eliminates bar marking effectively.
*Short web path design for only 1.3 meters within a printing station can reduce material waste during start up and job change,because total footage of a system equipped with egiht colors printing plus two diecutting station is less than *5 meters.
*Air cylinder locked in tray,much easier and quicker change.Separated anilox with ink pan.
*Pre-determined pressure mechanism will maintain anilox pressure and impression pressure after plate cylinder changed to shorten the time of jogging and reduce substrate waste.
*Nip device on waste rewind to guarantee waste matrix to be unbreakable during high speed production which increase effectiveness and yield of production since we can push matrix width to the minimum required by the cutting edge of knife.
*Press is equipped with advanced tension control device.Change of operating speed will not affect registration.There is no waste during jogging and all the way up to production speed.
*Rail system for portable cold foil/screen,ect. ,much easier to extend more options.
 
 
The entire operation is humanized due to the above mentioned technologies.Operator can easily run the equipment.Plates change for each order only takes *0 to *0 minutes.Substrate waste during startup is around *0 to *0 meters.The waste during web-change can be controlled within *0 meters.It is a piece of equipment suitable for short and mid-size run.Actual production speed can be easily reached up to ******0 meters/min.It fits for long run jobs as well.