brass valve

Product Description

ABL****1 Brass ball valve, steel handle and aluminium handle
Size: 1/4'' to 2''  
Technical Requirement:
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges.
Before connecting, body cap male thread should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water at pressure no less than 0.8MPA, no leakage.
 

Brass bibcock
Aluminium handle  
Size:1/2''x3/4'' 3/4x1''

ABL****1Brass check valve
Brass boday  
Size: 1/2'' to 2''  
Manufacturer and exporter of brass ball valves, pipe and plumbing fittings, gate, check, angle valves and brass bibcocks.  we passed the certification of ISO***2 international quality system in ***9 and was chosen through public appraisal as AAA grade enterprise by People's Bank of China at the same time.

ABL****7 Brass gate valve, Aluminium handwheel  
Size: 1/2'' to 4''  
Technical Requirement:  
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges.
Before connecting, body cap male thread should be coated with sealing glue.
Handle turn or close freely.
After assembling, test by water at pressure no less than 0.6MPA, no leakage.

 Brass gas valve, steel handle, INIG approved (gas certification in Poland and Ukraine)

Size: 3/8'' to 2"Technical Requirement:  
Before assembling, all parts should be clean, no oil or grease, remove all burrs and sharp edges. Before connecting, body cap male thread should be coated with sealing glue. Handle turn or close freely. After assembling, test by water at pressure no less then MOP***0, no leakage.