Charge Regulators

Product Description

System Voltage *2V DC PV Current *0A max. Load Current *0A continue and *5A for *0 seconds Temperature Range **0ºC ��.**0ºC Temperature Coefficient of Charge Voltage <*0ºC ambient then *4mV/ºC >*0ºC ambient then *6mV/ºC Temperature Sensor LM**5 externally (mounted on battery clamp) Charge Cycle I Uo U Uo=*4,4V for 2 hours U=*3,8V float Deep Discharge Protection Load cut off at *1,5V Re-connect Voltage Load reconnect at *2,6V Load Overvoltage Protection Load disconnect above *6V Charge cycle period 1 Day Disconnect voltage PV *3,5V Dimensions **0 X *5 mm Software Owner Dünya Prestij Elektronik Battery Reverse Connection Protection Diode in series with battery ECR Programming by jumper on PCB (4 possible settings) J0 NO ECR J1 *0 Ah **0 Wh/Day J2 **0 Ah **0 Wh/Day J3 **0 Ah **0 Wh/Day ECR led's on the front (3) top led **0% middle led *6% lowest led *3% ECR Buzzer or horn sounds for *0 seconds at *3% level ECR Reset Recognition >5 hours no PV-voltage (night) reconnect load after 0,*5 hour of daylight Accuracy of Measurement 2% Energy Consumption <5mA IP Classification IP*4 (when housing in enclosed) Charge System Connector 1x PV 1x BAT 2x LOAD (parallel) 1x Temperature sensor Alarm System Connector 1x BAT 1X BUZZER 1X COAX IN OUT Corrosion protection Thick coating of PCB PCB= Printed Circuit Bord ECR= Energy Consumption Regulator (Limiter)