Product Description

Description:

Standards

• IEC ****1 Part *1

• IEC ****1 Part *1

Main Features:
1, All fixtures are made of stainless steel;
2, The burner is a belt type propane blowtorch with a Venturi mixer, and the burner nozzle is length **0mm, width *5mm;
3, Those burning holes are staggered into 3 rows, and the front width is *5mm, holes diameter is 1.*2mm and these holes center distance is 3.2mm;
5, One end of the specimen holder is equipped with a clamp to fix the sample, and the other end is convenient for heat transfer along the longitudinal specimen;
6, The cable sample is supported by two metal rings, and the middle length of the two rings is about **0mm;
7, An inner diameter of the sample supporting metal rings is **0mm, and the cross-sectional diameter of the ring is *0 ± 2mm.
8, The position of the burner torch from burning the bottom is not less than **0mm, and not less than **0mm from the tank wall.
Combustion System:
1, Independent standard electrical control platform;
2, With intelligent detection function, when a short circuit in the sample during the test, automatic alarm and turn off the fire source.
3, Fuse current in the experimental circuit is 2A;
4, The sample is applied to power of AV **0V ~ ***0V adjustable;
5, The time can be set free for the fire, the time recommended by standards is *0min.
Device parameters:  
1, Voltage: AC **0V *-phase, *0 / *0Hz, *0A;
2, The voltage 0 ~ ***0V; can be adjusted;
3, The breakdown current is 2A;
4, Maximum power: ***0VA;
5. Timer: 0 ~ **9min
6, The flame temperature of 0 ~ ***0 ℃ adjustable;
7, The test load current is 0.*5A, can be adjusted;
Specification
1. Size: 1,**0 (W) × **0 (D) × 1,**0 (H) mm
2, Console size: **0 (W) × **0 (D) × 1,**0 (H) mm
 3, Power: AC **0V *-phase, *0 / *0Hz, *0A
 4. Weight: **0kg