Closed or Open cooling water corrosion inhibitor

Open Cooling water system corrosion scale inhibitor HZ***0Characteristic

● Controls deposition and scale
● Maximizes corrosion protection without heavy metals
●minimizes acid feed
● Stable in presence of halogens

Technical Specification

Description and Use
HZ***0 controls the formation of corrosion and scale in open recirculating cooling water systems over the wide alkaline pH range (**8.5). HZ***0 is versatile and have been successfully used in a broad range of systems operating under varying conditions.
Typical Applications
HZ***0 is designed for cooling water systems to operate at alkaline pH typically 8.0 or above. This means that acid feed and the costs and concerns associated with it may be reduced or eliminated. This inhibit the corrosion of mild steel and copper and its alloys. They effectively control common scales, such as calcium carbonate and calcium phosphate, calcium sulfate and fouling, due to iron and other suspended solids.

Treatment And Feeding Requirements
Dosage:The proper treatment level of HZ***0 depends on the individual formulation and needs of your system. The product should be fed in accordance with control parameters. For consistent protection, continuous feed if recommended.
Feedpoint:HZ***0 should be fed to a point in the cooling system where they can rapidly mix with the bulk cooling water.
Feed Equipment:
Tanks, pumps, piping and valves should be made of mild steel, stainless steel, polyethylene or most common plastics.
Dilution:For best results, HZ***0 should be fed neat. Dilutions, if necessary, are best made with low hardness water.
Packaging Information
*5KG plastic drum or **0KG plastic drum or depend on the custom request.

Storage
Protect from freezing. If these products are frozen during shipment or storage, slight mixing may be required to ensure homogeneity.