Corrugated carton box flexo printing slotter die cutter machine

 The wallboard is made of solid casting with thickness of *0mm, which is processed by quenching and tempering, making the machine run smoothly and the wallboard does not deform.

 The connecting bar is welded by **0mm I-beam to make the machine run steadily and without trembling.

 Cast iron track is selected for walking track, and the walking is stable.

 All the double box clearance adjustment of warrant adjustment.

 The transmission part adopts cross slide and no gap transmission. The thickness of the gear is *0mm thick, which is made by quenching and tempering and high-precision grinding. The material is *0Cr material.

 The sprocket and gear are made of *5# and *0Cr alloy steel, which is processed by high-frequency quenching and tempering and grinding.

 Smooth operation, low noise, hardness HRC****5, long life, small wear and tear, can guarantee the accuracy for a long time.

 The cardboard drive adopts the suction belt transmission mode.

 The belt drive shaft is made of *5# steel after quenching and tempering, fine turning, fine grinding and electroplating.

 The main wall panel is made of steel plate with a thickness of *0mm, which is processed by quenching and tempering to make the machine run smoothly and the wall panel is not deformed.

 The connecting bar is welded with **0mm GB channel steel to make the machine run stably and not vibrate.

 The left and right walking track is made of *0MM thick steel plate track, which is processed by quenching and tempering, and the walking is stable without deformation

 The cantilevered beam is made of *5mm thick steel plate, which is processed by quenching and tempering.

 The lower cantilever beam of the origami is made of *5mm thick steel plate, which is processed by quenching and tempering.

 The cardboard conveyance is transmitted by the upper suction belt, and the lower roller is passively conveyed. The design structure adopts Japanese Mitsubishi technology.

 Left and right origami beam travel axis, use **8mm diameter guide shaft to slide, the support force is large, the machine runs stably and does not deform.

 The rack of the counting unit is welded by **0mm GB channel steel.

 Cardboard conveying is a belt conveying method.