Custom LED Test Case Demo box from exculsive brand

Product Description

Features:

1.The LEDtest & demo case withgood aluminum platesto protect the cabinet frame, the corner of the carton using stainless steel edge to anti-hit and to be firm extremely.

2.Lamp withone-on-one control switch, safe and convenient.

3. A stored box on the right to put cables, small tools or accessories.

4. two wheels makes very easy to carry.

5. Input voltage, current, active power, power factor, Frequency, annual power consumption, DC-power, contrasted

displaying *3 parameters on the meter green during testing.

6.The parameters are clear to display on the meter green , so saving-energy how it is at a glance.

Details for this LED test case:

Recognized lamp holderinterface : all socket interface has a corresponding-marked name for the user to distinguish and identify; All the socket interface have one-on-one control switch, convenient control and test.

1,  The caseinternal circuit: strictly distinguish for AC and DC; AC socket (- AC) interface can test the electric parameters are as follows: voltage, current, power, power factor, annual power consumption (*0 hours /per day ) and frequency;

2,  DC (- DC) part of the parameter display: DC lamp holder (- DC) interface data displayed in the DC POWER , such as MR*6. Dc voltage in the box internal is transformed into *2 v output to light sit interface.

5,  Parameters for , GU*0,E*4, E*6/ E*7 /B*2/G*4 and so on …can be tested (voltage, current, power, power factor, annual current consumption )

6,  Design for dimmable: Dimmable engine and Dimmable switch; there are two positions for dimmable switch-DIMMBALE and NON-DIMMABLE. When put the switch on dimmable position, the brightness for all dimmable lamps can be adjusted. When put the switch on Non-dimmable position, all the dimmable lamps can’t be adjusted. So it can be tested that if the brightness of the lamp can be adjusted.

7,   three wire clamps (2 PCS AC output and DC *2 output) and one AC output universal socket. It’s convenient for external power source. Every lamp socket has a unique switch and mark, which is convenient for identification and control.

8,   One storehouse is for small things; 3 foundation plates are to protect the case; a pull rode is convenient for moving.

AC Meter Instruction from this LED test Case

1,AC voltage Parameter:Input voltage can be displayed; support international use; voltage ranges from *6~**4V. Overseas voltage can be shown for overseas use.

2,AC current parameter: Input Current can be displayed. The measurement for current is accurate to mA. The accuracy is about 1/***0.the measuring range is 4A.

3,AC Power parameter:AC power display area: Power can be displayed. Power meter is correct to 1 decimal point. So, it can show the change and contrast of power correctly. The ultimate power is **9.9w. If it surpasses **9.9, it will be showed as HHHHH.

4,Power Factor(PF) parameter:LED power factor can be displayed. (PF is a very important parameter for LED; power factor for traditional lamp is only 1)

5,Annual Power consumption parameter :Annual power consumption display area: Annual power consumption can be displayed (ten hours power on per day)

6,Frequency parameter:Frequency display area: The frequency for relative state grid can be showed. Some frequency abroad is *0Hz.

7,DC Power parameter: The power of the DC*2V lamp can be showed.

Notes: Wiring must be connected as shown below method, otherwise, it may cause damage to the tester.

 

Packing:PaperCartons,withEPEfoam holders inside,suitable for international transportation.

Product size:L*2*W*2*H*3   (Unit: cm)

CTN size:L*6*W*8*H*5

Net weight:3.5KG

Gross Weight:5KG

Volume weight:L*6*W*8*H*5/***0

Attachments: power cablex1pc, outer cable 1pc, fusex3pcs,User Manualx1pc,

Warranty cardx1pc