Dreambox 800 HD satellite receiver

Product Description

We supply Dream box DM**0/DM**0 HD/Openbox S9/*0 PVR. 

Specifications
1, MPEG2 / H. **4 Hardware decoding
2, Linux Operating system
3, 1xCA and 2xUSB
4, Ethernet Interface
5, **0 MHz MIPS Processor

Product Description

- **0 MHz MIPS Processor
- Linux Operating System
- OLED - Display
- MPEG*2 / H. **4 Hardware decoding
- Tuner: DVB-S, optional: DVB-C, DVB-T
- Tuner Module, Plug&Play
- 1 x Smartcard-Reader
- V. *4/RS**2 Interface
- *0/**0Mbit Ethernet Interface
- 1 x Scart (RGB, FBAS or S-Video)
- DVI
- 2 x USB 2.0
- analog modem
- S/PDIF Interface for digital bit stream out (AC*3)
- *4 MByte Flash, **6 MByte RAM
- SATA
- for use either as internal SATA HDD 2, 5
- or to use for extern eSATA
- unlimited channel lists for TV/Radio
- channel-change time < 1 second
- automatic service scan
- directly bouquet-lists
- EPG (electronic program guide)
- multiple LNB-Switching control (supports DiSEqC)
- OSD in many languages and skin-support
- Videotext Decoder
- extern *2V power supply
DreamBox DM**0 technical data

DBS-Tuner mit DVB-S2:
Frequency Range ********0 MHz
Demodulation DVB-S (QPSK); DVB-S2 (8PSK, QPSK)
DVB-S2: *0 *1 Mbaud/s (8PSK), *0 *0 Mbaud/s (QPSK)

Video decoder:
Video Compression MPEG*2 and MPEG*1 compatible, H. **6
Video Formats 4: 3 / *6: 9
Letterbox for 4: 3 TV-Device

Audio decoder:
Audiokompression MPEG*1 & MPEG*2 Layer I and II, MP3
Audio Mode Dual (main/sub), Stereo
Frequency: *2 KHz, *4.1 KHz, *8 KHz, *6 KHz, *2.*5 KHz, *4 KHz

Output analog:
Output Level L/R 0, 5 Vss on **0 Ohm
THD > *0 dB (1 KHz)
Crosstalk < **5 dB

Output digital:
Output Level 0, 5 Vss on *5 Ohm
Sampled Data Filtering *2 KHz, *4.1 KHz, *8 KHz
S/PDIF-Output optical, Toslink

Ausgang Video:
Ausgangspegel FBAS 1 Vss +/- 0.3 dB an *5 Ohm

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm
Teletext filter in conformity with ETS **0 **2 Standard

TV-Scart:
Output: FBAS, RGB, S-Video

Serielle Interface RS **2:
Typ RS**2 bidirectional
Bitrate **5, 2 kBit/s max.
Plug Connector SUB-D*9
Function: Update of Firmware

Ethernet:
*0/**0 MBit compatible interface
Function: Update of Firmware

Analoge modem:
Analoge modem for Internet connection

SATA Interface:
- for use either as internal HDD 2, 5 or eSATAor internal 2, 5" HDD

USB
2 x USB 2.0 Host

LNB power and polarisation per tuner:
LNB Current **0mA max.; Short-circuit-protected
LNB Voltage vertical < *4V no load, > *1, 5V at **0mA
LNB Voltage horizontal < *0V no load, > *7, 3V at **0mA

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

Power consumption: < *5W at *2V

External PSU
Input:
******0V AC / ****0Hz / 0, 6A
Output:
*2V = / 3, 0A

Physical specification:
Humidity < *0%
Size (W x D x H): **5 mm x **0 mm x *0 mm
Weight: 1, 8 kg without HDD