Dreambox dm500-s

Product Description

Dreambox dm***-s Satellite receiver DM**0S Powerful receiver for digital TV and Radio programs. available at present: DM**0 / DM**0+ S for satellite receiving DM**0 T for terrestrial receiving DM**0 C for your cable connection Main features are a **0 MHz PowerPC (**0 Mips) Linux OP, the Dreambox DM**0 supports the Standard Linux API (DirectFB, Linux-FB, LIRC, .. ) - **0 MHz PowerPC Processor (**0 Mips) - Linux Operating System - 1 x Smartcard-Reader - MPEG2 Hardware decoding - available tuner DM**0: DVB-S, DVB-C, DVB-T - available tuner DM**0+: DVB-S - V.*4/RS**2 Interface - *0/**0Mbit compatible Ethernet Interface - 2 LED status - unlimited channel lists for TV/Radio - channel-change time < 1 second - full automatic service scan - supports directly bouquet-lists - supports EPG (electronic program guide) - supports own videotext - supports multiple LNB-Switching control (DiSEqC) - fully adaptable OSD in many languages and skin-support - S/PDIF Interface for digital bit stream out (AC*3) - 1 x Scart-interfaces only DM**0+ : - *2 MByte Flash - *6 MByte RAM DreamBox DM**0 / DM**0 + technical data DBS-Tuner: Frequency Range **0 . ***0 MHz Signal Level - *5 dBm . - *5 dBm Signal-to-Noise Level *2 dB max. DBS-Tuner Input Connector F-Type female Input Impedance *5 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8 Roll-off Factor *5 % Demultiplexing according ISO ******1 Video decoder: Video Compression MPEG*2 and MPEG*1 compatible Video Standard PAL G/ *5 Hz Video Formats 4:3 / *6:9 Letterbox for 4:3 TV-Device Audio decoder: Audiokompression MPEG*1 & MPEG*2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: *2 kHz, *4.1 kHz, *8 kHz, *6 kHz, *2.*5 kHz, *4 kHz Output analog: Output Level L/R 0, 5 Vss on **0 Ohm THD > *0 dB (1 kHz) Crosstalk < **5 dB Output digital: Output Level 0, 5 Vss on *5 Ohm Sampled Data Filtering *2 kHz, *4.1 kHz, *8 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on *5 Ohm Teletext filter in conformity with ETS **0 **2 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS **2: Typ RS**2 bidirectional Bitrate **5, 2 kBit/s max. Plug Connector SUB-D*9 Function: Update of Firmware Ethernet: *0/**0 MBit compatible interface Function: Update of Firmware LNB Power and polarisation: LNB Current **0mA max. ; short-circuit-protected LNB Voltage vertical < *4V no load, > *1, 5V at **0mA LNB Voltage horizontal < *0V no load, > *7, 3V at **0mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control Power consumption: < *0W / *2V Input voltage: DC*2V +/- *5% Extern power supply: Input: ******0V AC / ****0Hz / 0, 6A Output: *2V = / 1A or 2A Physical specification: Ambient Temperature **5�*******5�C Humidity < *0% Size (W x D x H): **5 mm x **0 mm x *0 mm Weight: 0, 6 kg