Energy Saving Fluorescent Tube

Product Description

T5 **8 Watt Tri phosphorus fluorescent powder, providing high luminous and colour rendering index and incorporating an ionizing powder that provides relief to people how suffer with office fatigue, head aches, saw eyes etc. ***0, ***0, ***0k Kelvin colour temperature ***0 Luminous soft white Voltage AC **0 **0v/ **0 Frequency; *0 *0 Hz Compact design with high frequency electronic circuit. The frame is made from a strong aluminum with a anti-oxidative finish, making it a strong durable, anti distortion fixture. The T***8 Easy Fit unit is DIY easy to install (saving on maintenance crew cost, on average about $*5.*0hour) The two ends using PETE anti-burn plastic ends and White high gloss polished aluminum body. No stroboscopic effect, instant on and instant off and no time delay No interference to home appliance, communication, hospital and office equipment. With ****0% Energy saving and a long life of 8, **0 hours or 3 years continuse use (depending on power systems used and operating time) Easy replacement T5 tubes. (Will pay for it self with in the first Three month of usage). When the T5 *8 watt tube burns out. Just simply replace the tube and the Easy Fit Unit stays locked in place, Its as easy as re-placing the tube. Calculations are based on power and wattage usage. *6 watt tube=*6 watts + *0 watt ballast+ 4watt starter=*0watts usage on average. The T5 *8 (Easy fit unit with a T5 tube) = *8 watts usage, and requires no ballast or starter .With a saving of ****0% on top of your lighting bill (The *0 watts usage is based on a standard single *6 watt batten unit ) T5 *8 watt = *8 watts usage and thatâs it! And thats biased on our single T**8 watt easy fit unit . # The T***8 Watt easy fit unit can be installed In where *8, *6w or *0w T8 tubes on any conventional batten or fixtures . # In areas such as shops, schools, offices, hospitals, subways, some street lights and car parks. # First switch the power off and remove the starter