Exhaust Valve

Product Description

FREE-VALVEbrandCARX-type composite air-exhaust valve body is barrel-shaped, and includes floats, stems and disc. The valves are used at the highest point on the pipe or where there is a closed gas and at the pump outlet for removing gas from the pipe, so that the pipe is working properly. If the air-exhaust valve is not installed, the pipeline at any time gas resistance, so that the pipeline water capacity can not meet the design requirements. When negative pressure is generated in the pipeline, the valve is quickly drawn into the outside air to prevent damage to the pipeline due to negative pressure.
Working principle :
The composite air-exhaust valve is provided with two holes, one big and the other small, the big hole and the diameter is basically equal, The pipeline will have a lot of gas discharged to the outside when the water is supplied in the first time, these gases are discharged from the big hole.When the air is exhausted, the float ball is floated in the valve when there is water in the body cavity, the drive plug disc to the closed position, the large hole to stop a large amount of exhaust.When the water is normally transported in the pipe, if there is a small amount of air gathered in the valve to a considerable extent, the water level in the valve drops, the floating ball drops, and the air is discharged from the small hole.When negative pressure is generated in the pipe.
Parts Material List :

Body:WCB，CF8,ductile iron QT450
Floating Ball :SS304,SS316，SS316L
Sealing material:Nitrile rubber
Applications
Water supplysystem of power plant ,medium is water in normal temperature 
Installation diagram

During the use of the air-exhaust valve, the medium pressure should not be less than 0.02mpa. If it is less than 0.02mpa, the air-exhaust valve is easy to leak, and the valve must be equipped with a cut-off valve for maintenance.