FLYCOLOR 50A brushless speed controller programmable ESC SBEC 5.5V/4A

Product Description

Application of ESC:
RC airplane (including fixed wing, helicopter)

Electrical performance parameters ofESC:
Input Voltage:**6 cells LiPo batteries /***8 cells NiMh batteries
Continuous current output:*0A
The maximum instantaneous current (*0S):*0A
BEC:SBEC/UBEC/OPTO
BEC output:5.5V/4A(SBEC),5.5V/1A*4A(UBEC),OPTO
Standard configuration: SBEC 5.5V/4A
 
 
Shape and weight ofESC:
Dimensions (Length﹡Width﹡Height):*0**2**7mm
Weight::*8G(with BEC),*3G(OPTO)
Positive and negative power wires:
wire size:*4#    Material:Copper Silicone Wire  Color:+ Red - Black  Length:**0mm
UVW wire:
wire size:*4 #  Material:Copper Silicone Wire  Color:U Black V Blue W Red
Length:*0mm
Signal wire:
wire size:*4#   Length:**0mm  Connector specification:3pin DuPont terminal
Types suitable for T head    Rubber head Specification:￠3.5**2      
Thrum heat shrinkable catheter specification:￠4.5**0  Color: Red, Black
Heat sink specification:*9**0                     Color:Silver
ESC heat shrinkable catheter tone specification:￠*5**0           Color:yellow
Manufacturers standard specification
 
 
Parameter settings ofESC:
Brake Setting:On/Off,the default is off
Setting for battery type:LiPo (lithium) or NiCd/ NiMh,the default is LiPo
Low-voltage protection threshold setting:low/medium/high,the default is medium (3.0V/*5%)
Motor timing setting (increase the efficiency and the start stability of the electronic governor):low/medium/high,the default is medium (3.0V/*5%)
Accelerated startup setting(for precision gearboxes and helicopters):(provide the rapid accelerated startup with linear throttle response),the default is soft
Helicopter mode (for helicopters),the default is off
Motor steering(clockwise/counterclockwise)/forward steering/reverse steering,the default is forward steering
PWM operating frequency:8KHz/*6KHz,the default is 8KHz
Low voltage protection modes(lower power or stop immediately):lower power/immediately stop,the default is lower power
 
Standard configuration:
Power line length:**0mm    UVW line length:*0(mm)    no rubber head or T head     SBEC 5.5V/4A