Good Wear Resistant Silicone Ink for Shoes Screen Printing

Product Description

Good wear resistant silicone ink for shoes screen printing


We produce matte,glossy,thick effect gliter,flocking ,conductive effect and so on silicone ink special for textile screen printing and heat transfer,with excellent glossy,matte conductive effect ,and good fastness,supper soft,we also produce more than 30 colors pigments special for silicone ink with excellent coverage and rendering.

Products data:

Silicone ink Appliation

Suitable for most natural and synthetic fabrics, including elastic fabrics for these garments:

Sports wear, T-shirt , gloves,socks,sleepwear ,underwear,and so on.

• Good hand feel: Soft, non-sticky handle with no blocking problem
• Excellent durability: Wash- and weather-resistance
• Color fastness: No color migration, even between red and white
• Improved fashion appearance: Semi-gloss finish with no creasing
• High elongation: Suitable for fabric with Lycra content
• Fast cure: ink sureface drying in 3 to 6 seconds at skin temperatures between 100-130°C
• Operation-friendly: Suitable viscosity and thixotropy for manual and machine screen printing
• Easily pigmented:color pigment adding ratio is 3 to 10 percent,if white color will be 10 to 20 percent
• Environmentally sound: Does not contain organotin, phthalate, formaldehyde, PVC or solvent,Non-toxic and odorless, food grade silicone

Silicone Ink Prepare Methods :

Mixed Color master batch: Using it when needing various colors.

For ink to be yellow: mixed with yellow color paste3%-10% to colors! sometimes can mix some white pigment together to get the yellow effect, the adding ratio is depends on the customers printed sample request.

Same process as for ink to blue , Red and other color ink!

For ink to be grey: add 3% of black color paste and 5% of white color paste , the adding ratio is depends on the customers printed sample request.

If need white color,the adding ratio is 10%-15%.

Silicone Ink Mix process :

1. Mixed 2-4% CATATLYST curing agent B Part into small amount of silicone ink A Part. 2. The curing agent should be mixed very well,Otherwise,some parts wont be cured. 3. could use thinner for decrease the viscosity,adding ratio 5%-15%,if too much the abrasiveness, durability and adhesion force will be reduce.,so have to test before production is required.

Silicone Ink Drying Methods :

1. According to different thickness of silicone ink, the curing time is different. Normal situation curing time is 50seconds with the temperature of 120-150degree

2.The actual temperature and time will depend on the printing thickness. Naturally drying without any heating is also workable,but should choose

our special fast drying silicone ink

storage:

Liquid silicone rubbers of the SOLLYD RG series have a shelf life of 12 months when stored at 5 to 35 sealed in the original containers.

Safety instruction:

Safety information is seen on the MSDS, which is supplied by the manufacturer.

Packing:

General silicone: 20kg/barrel

Matte silicone: 18kg/barrel

Screen printing ink products lines:

Silicone ink for textile screen printing 

Silicone ink for heat transfer

Silicone ink special for gloves and socks

Plastisol ink for textile screen printing

Plastisol ink for heat transfer 

Plastisol ink specail for gloves and socks printing

Water-based ink for textile screen printing 

Conductive ink for gloves 

Silicone ink for silicone goods printing

Cooperation advantages:

1. All sided technical support

2. In time developing service

3. The timely and effective printing solutions

4. Have priority to get the newest development from us

5. We have the complete full range of printing materials, you can get any different printing materials from us.

Any operating problems confused you will be solved at the

 most prompt time.We always offer relative technical support/consultant.Quick

 response,all your inquiry will be replied whthin 24 hours .
Service phone:008618819520071

Wechat/whatsapp:008618819520071
QQ:2740672868
*:*-*@********************