GPRS Telemetry with RS458 RS232

Product Description

GSM GPRS RTU Telemetry Logging Engine S**0 Series

 

 

 

 

 

 

 

 

>>>Model List Table:                   

>>>S**0,S**0,S**0 GPRS Data Logger Features:  

> Direct connection to the GSM GPRS Network;

> Transparent Serial Data Tunneling using low cost SMS/GPRS network;

> Remote Configuration by SMS Messages or GPRS;

> Upload data via GPRS or SMS on Schedule or event occurs;

> Supports Dynamic Domain name or fixed IP address;

> Supports SMS, CSD, GPRS, UDP and TCP/IP protocols;

> Supports Modbus RTU protocols;

> 2 RS**2 Serial Ports, and 1 RS**5 Serial Ports;

> UP TO 6 OPT Coupler (***4V) Digital Inputs can be programmed to NC/NO/Edge/Level type by switch, OPT and NON OPT can be programmed by switch, when alarm occurs can send Alarm Messages by SMS or GPRS or auto dial the preset phone numbers;

> UP TO 6 digital s can be used as Pulse Counters;

> UP TO 4 OPT Digital Outputscan be programmed as dial to switch on/off with free communication fee, alarm-linkage and Schedule to action, also can be send SMS to switch on/off;

> UP TO *0 Analogue Inputs. (*2 bit resolution, **5V or ***0mA can be programmer by switches);

>UP TO 4 Digital Relay Outputs :**0VAC/3A, *4VDC /3A, Can be controlled by Event, scheme, Incoming call, SMS Commands, Timer, Interlock; 2 outputs can setup as NC or NO type;

> User friendly PC Programming Interface, it can remotely program the terminals as well as to   upload the data from the terminals by SMS or GPRS, all of the Current Value or status of the terminal can be display directly, and also will display the SMS Command details while you programming it;

 

 

>>>>GPRS Data Logger S**0,S**0,S**0 is a Low cost Remote GPRS Monitoring Suitable for:

 

>Environmental

>Pumping station

>Gas data acquisition

>Oilfield

>Power Station

>Rain gauge

>Urban water supply pipe network

>Reservoir

>Meter reading system

>Sewage treatment

>Transformer

>Water level