Handheld Series Digital Storage Oscilloscope

Product Description

Bandwidth:*0MHz;
Sample Rate ( Real time ):**0MS/s
Horizontal Scale(S/div): 5ns/div~**0s/div, step by 1~2.5~5
 Rise time(at , typical):≤*7.5ns
Display:3.5'' color TFT display  (**0×**0 pixels)
Channels: Single
Record length:Max. ***0 points on each channel
Interpolation:(sin x)/x
Probe attenuation factor:1X，*0X，**0X，***0X
Input coupling:DC, AC, GND
DC accuracy(Average):Average>*6:±(3% reading *0.*5div) forâ–³V

Vertical Sensitivity: 5mV/divï½�5V/div (at )
Vertical resolution (A/D):8 bit
 Max. Input Voltage:**0V (PK-PK) (DC + AC PK-PK, 1MΩ impedance, Probe attenuation *0:1) CAT II
Trigger Type:Edge, Video
Trigger Mode:Auto, Normal, Single
Trigger level:±6 divisions from screen center
Acquisition modes:Sample, Peak Detect and Average
DC gain accuracy:±3%
Automatic Measurement:Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→Bã€� Delay A→B
Waveform math:Unavailable
 Waveform storage:4 waveforms
Lissajou’s   Bandwidth :Unavailable
 figure           Phase difference :Unavailable
Communication interface:USB
Power supply:**0V***0V AC, *0/*0Hz
Li-ion battery:7.4V, 6 hours operation


Multimeter specifications
 Full scale reading:3 3/4 digits (Max.****-count)
 Input Impedance:*0 MΩ
Capacitance:*1.2nF***0uF:±(3%±3 digit)
Voltage:VDC:**0mV,4V, **0V: ±(1±1digit) Max.:DC ***0V, VAC:4V,*0V,
                **0V:±(1±3digit)
                 Frequency:*0Hz***0Hz, Max::AC **0V(virtual value)
Current: DCA:*0mA, **0mA:±(1.5%±1 digit) *0A:±(3%±3digit)
                 DAA:*0mA±(1.5%±3digit) **0mA:±(2±1digit) *0A:±(3%±3digit)