Product Description

High Quality fine particles metal zinc powder making machines

These zinc powder making machines includes atomizing machines, underneath feeder and screening machine. The production plant is using the latest technology and with centrifugal atomization weightlessness electromagnetic vibration feeder system with ultrasonic vibration screening machine. Able to produce according to market demand hypoxia, high roundness of T3, T4, T5, and other specifications of tin powder. About 2 tons per day total milling, spray rate of about *0%, about *0% yield. Tin powder mass to achieve J-STD***6 standard. The following is an electromagnetic vibration feeder principle, there are two models to choose from, with manual control and weight loss control, weight loss system can be very average and stable under the quantity according to the set for the next feeding.
 
1 large output, daily output can reach more than 2 tons.
2 wide applicability to produce lead-free powder, tin lead powder, lead powder tin-silver, tin bismuth silver, tin, zinc, and other varieties.
3 low oxygen, high roundness rate
4 Equipped with remote control contact, easy to upgrade to the overall production line automation and remote monitoring.
5 simple operation, low failure rate and maintenance easy.
  

Centrifugal atomizing machine

Centrifugal atomizing machine is used for metal powder atomizing, which is an important method used in metal processing equipment. Due to fine powder size, good shape and controllable cost , the machine has been paid continuous attention. But subject to technical limitations, commonly also used domestic metal milling and ultrasonic aerosol spray, aerosol although the yield is higher, but the large amount of inert gas required to protect and atomized waste in the production process so that a large number of inert gas in the production costs also increased a lot. powder produced is quite irregular, finished low efficiency of ultrasonic atomization Although high sphericity narrow range, but the yield is low. abroad, especially in some Western countries, centrifugal atomization has gradually replaced the gas atomization and ultrasonic atomization. centrifugal atomization metal milling machine will be a trend in the future.

The basic process of centrifugal atomization, from the melting unit out of the molten metal was good diversion through the guide means to the rotation center of the disc, then the effect of inertia and centrifugal throw the molten metal distribution in the radial direction and open to the rotating disc forming a thin film. When the film reaches the edge of the rotating disk, which is atomized into droplets. After solidification of these droplets form a powder. Produce high roundness of a variety of specifications of the metal powder.

The basic parameters of the device:
Equipment size:
      Diameter of 2.*0 m
      Height 3.*0 m
      Wall thickness of 8 mm

Device Utility Performance:
      1 Vacuum degree:*0.1Mpa
      2 oxygen content inside: <**0PPM
      3 Motor speed: up to **0,**0 rev / min
      4 Powder Shape: Spherical
      5 micron powder size :****3
      6 Capacity: **0KG / H
      7 atomization rate: *0%

Features:
      An automatic cooling system that can be kept at room temperature produced
      2 automatic supply of oxygen and nitrogen
      3 atomization system to maintain low internal pressure range of long-term stability
      4 automatic nozzle cleaning system prevents nozzle clogging and flow instability
      5 high-speed imported motor, capable of producing the 3rd, the 4th and the 5th pink powder.

Ultrasonic Vibratory Sieve

When the the screening encounter ultra-light or ultra-fine particles ( **0 mesh to **5 mesh ) , often can not screening,The main reason is the mesh easily blocked , causing the material can not be through the screen . Conventional methods can not effectively clean the surface of the screen , combined with ultra-fine mesh can not withstand intense cleaning action. Hereby , ultrasonic technology was brought.

Victory ultrasonic vibrating screen adopt the  Switzerland ultrasonic generator and transducer , to ensure that the entire high-frequency system is highly efficient and stable , while providing screening efficiency as well as screen life . The external transducer structure, reducing material dust may be damage to the transducer , and also the surface temperature of the screen is maintained at normal room temperature levels . Demolition convenient , reliable sealing .

Victory ultrasonic vibrating screen to provide multi-layer mesh screened at the same time , let your particle classification easier and faster . Now widely used in ultra - fine metal powders , chemicals, pigments , cosmetics , particle fineness of the most demanding industries .