High speed flexo printing, slotting, rotay diecutting machine

Product Description

High quality material and fittings are used for the machine.

The drivec gears are hardened and ground. Hardness >HRC*0.

Auto zero set

All rolling shafts are plated with chromium to enhance hardness.

PLC with touch screen multifunction control, repeat order store and auto reset system after cleaning.

1.Feeding unit

Variable frequency control of the main electromotor.

Vacuum assisted feeding system ensures the bending board be fed correctly with high speed.

The position of the right side baffle is electrically adjusted.

Skip feeding device is available. The max length is ***0mm.

Special fan sufficiently eliminates the dust and scraps on the surface of the board to improve the printing quality

2.Printing unit

The phase is **0 degree adjusted by electric planet gears. Keyless junction and foot-operated on-off make the plate loading and unloading convenient.

The plate roll axial adjustment is hand-operated. Range is ***0mm.

Drum type rubber roller ensures the quality of the ink distributing.

Pneumatic circular ink supply system.

Ceramic anilox roller can be chosen.

3.Slotting unit

The phase is **0 degree adjusted by the electric planet gears. Keyless junction.

The height of carton is adjusted by the electric internal tooth structure.

The polyurethane precompression wheel guaranteed that the cardboard is not crushed

4.Die cutting unit

Double worm abrasivec belt cushion correction facility.

Cushion axial floating automatically to improve the utilization rate of cushion. The range of floating is ***0mm ( from middle to left or right ).

Speed difference self-compensating function.

The axial adjustment of platen roller is hand operated. Range is ***0mm. ( from middle to left or right ).

Die cutting phase is adjusted by the electric planet gears. Keyless junction.

Selling point:

1, All of the rolls has been dynamic static balance treated.

2, All anilox roll is between ******0. If the client request the ink erasing knife the anilox roll is between ******0 which is as same as the offset printing.

3, Hardness of the rubber roll is above *0 degree.

4, Top end lead edge feeder which is 3 times more expensive than the normal one but is *0 times longer in using life.