Highway guardrail roll forming machine

Product Description

Forming processing Uncoiler**- flatting **- punchine **- fast feeding **- opto-electrical cutting **- forming **- alignment device **- collection **- controller **- forming moulds Unit performance: 1, Total power of equipment is *0kw 2, Maximum height of profiles formed: *5mm 3, Maximum thickness: 4.0mm 4, Maximum forming speed: *5m/min 5, The welding machine body structure must conform to the requirement, the welding must conform to the national welding standard. 6, The equipment after antirust processing, brush antirust paint first, the antirust paint must cover comprehensively, then brush the high quality finish paint. The movable part shows the different color for caution. Equipment parameter: 1、De-coiler 1) The un-coiler with bipyramid and tension power, 2） Loading 8T. Inner diameter of coil: φ**8mm, 3) Maximum diameter of coil: φ***0mm, 4) Power of tension power: 2.2kw, 2，Flatting machine 1) The wall plate type seven roller flatter, two rollers clamp deliver, five rollers for leveling. 2) Power: 7.5kw, 3， Punching machine 1) Using type Yl*****5 4 pillar hydraulic pressure puching machine, 2) Hydraulic pressure power: *2kw. 3) Material of blade mould & plunger chip is alloy steel Cr*2MoV. 4，Fast feeding 1) Initiative delivers. 2） The power disposition is the 2.2KW. 3）The reductor is ZQ**0. 5，Opto-electrical Cutting device 6， Forming machine: 1) Forming racks: *2sets 2) Cast iron torri type 3) Width of machine: **0mm 4) Material of torri is HT**0, tempering 5) Double axis transmission gear box 1set, under the axis transmission gear box *0set, bevel gear modulus M=9, material of gear box is only HT**0. 6) Power of main machine: *5kw, transducer speed governor. ZQ**0 ，reductor, speed ratio:*8.*7, Between the transmission gear box uses 1 inch double chain drive; Connects with the rotary drive shaft between rollers, rotary drive shaft model ******5; Uses 1.5 inch double chain drives with the speed reduce