Hiyunton H320 VHF/UHF walkie talkie interphone

Product Description

Function 【High/Low Power Switchable】 High/Low power is switchable via the programmed key at a per channel basis, tailored for user environment. Low output power preserves battery life when communication within limited range coverage; while high output power optimizes range coverage when further distance required. 【Programmable *2.5kHz / *5kHz Channel Spacing】 The feature enables flexibility and easy migration of channel spacing requirements when the need arises, with no need to buy new radios. 【DTMF ANI Encode】 DTMF ANI can be set on or off at a per channel basis. 【*-Tone Encode and Decode】 The *-Tone encode and decode functions are assignable at a per channel basis. An incoming message is signaled with audio and visual alert. 【Monitor】 Allows continuous channel monitoring. The feature is especially helpful for adjusting volume or receiving a weak signal. 【Battery Save】 The Battery Save feature is automatically activated once no activity on the channel and no operation performed, for extended operation time. 【Low Battery Alert】 For extra convenience, the top-mounted LED flashes red to alert users to recharge the battery should the battery level run low. 【Busy Channel Lockout】 The feature further improves channel management by preventing transmission if another talk group is already on the air. 【Time-out Timer】 The feature allows for more efficient use of channels by limiting the amount of time of each transmission. 【Wired Clone】 Cloning enables duplication of radios in the field via a simple interface cable, without the use of a PC or special equipment. 【PC Programming】 Allows you to customize each radio to fit your needs. 【Squelch Tail Elimination】 The function will minimize the annoying audio outputs that occur at the receiver on completion of a transmission. 【Selectable Squelch Level (**9)】 The purpose of squelch is to mute audio output from the speaker when no signals are present. The higher the squelch level selected, the stronger the signals must be to receive. The appropriate squelch level depends on ambient RF noise conditions. 【Priority Channel Scan】 Priority scan permits scanning of all channels while simultaneously monitoring a priority channel, allowing for activity even while receiving a call on another non-priority channel. *CTCSS、CDCSS、DTMF、*-TONE