Hot selling avr generator voltage regulator MX321

Product Description

avr generator voltage regulator
Product description:
MX**1 3 Phase Sensing Permanent Magnet Generator type voltage regulator is a compatible replacement for Newage Stamford Mx**1

Main features:
1、Voltage regulation < ±0.5% RMS
2、For use in parallel operation
3、RAMP, DIP, DWELL, DROOP, RMS, U/F, Over Voltage & Over Excitation Adjustment Functions
4、Over Exc. / Over Volt. & UFRO LED indicators
5、Maximum. Current limiting function

AVR adjustment ( adjusted at the factory , the user only when necessary, adjusted as follows ) :

 A voltage regulator such as the output voltage does not match the voltage adjustment potentiometer clockwise , the output voltage increases ; and vice versa .

2 frequency setting the engine speed adjusted *7HZ, UFRO potentiometer counterclockwise rotation , so that the indicator light-emitting diodes , can be transferred back to the engine speed .

3 overcurrent less excited at the rated power of the generator , the rotating field trip potentiometer counterclockwise , so that the indicator light-emitting diodes , and then rotated about 5 degrees to shun .

4 counterclockwise rotation overvoltage overvoltage adjustment potentiometer , so that the indicator light-emitting diodes , and then rotated clockwise about 5 degrees.

The definition of the different colors :

1 This is the meaning of three colors : red for Stanford 's early products , the use of capacitor WIMA, the quality is very good. Blue indicates the latter product , capacitor EPCOS, the quality is also good . Gray is the last two years before that , the capacitance of AV, and the packaging is different.

2 vary the capacitance , the price is different

3 Although prices vary , but the quality is the same. But some maintenance staff always feel better in red , red is also the most expensive .

Specifications: 
Operating voltage range: **0 ~ **5 V 
The maximum current is: 6A 
DROOP: Set pressure decreased 5% (PF = 0) TRIM:. Optimize voltage correction sensitivity EXC TRIP:. Set too exciting trip point. 
DIP: adjust the voltage / frequency scaling DWELL:. Settings to the time / frequency ratio of I / LIMIT:.. Setting the stator current output limit OVER / V: Set over voltage trip point. 
RAMP: Set during no-load voltage slowly rise time RMS:. Rms value of the generator set. 
Highlight special features / characteristics adjustment knob: VOLT: adjust the voltage STAB:. Adjustment stability UFRO:. Adjust frequency protection turning point.Cancel