FOB Price
Get Latest Price|
- Minimum Order
Country:
China
Model No:
-
FOB Price:
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
-
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
-
Product Group :
-
Contact Person Alice
Room 1701, No.6 Building, Joyi Morgan Center, Huayuan Road and Guoji Road, Zhengzhou City, Henan Pro, Zhengzhou, Henan
The raw material can be waste tire, tyre, plastic or scrap
rubber. All if the above wastes can be processed by our machine.
The following are details:
Separate the ingredient which can not be refined from waste
plastic, such as: soil, wood, stone, brick etc. If the raw
materials are paper mill’s waste, separate the pulp. If there is
water in raw material, should dry it firstly. Methods as
follows:
1. Dry in the sun: if you have enough area, you could dry the
material in the sun. You should often stir it.
2. Squeeze water from material using a large power extruder.
3. Dry the material using a spin-drier.
If the raw material is waste tire and its diameter is over 1.4
meter, should cut the inner ring firstly.
It is usually *3 feet width and **1 feet length for the *0 tons capacity machine.
a.Huayin waste plastic pyrolysis plant use
auto-feeder to feed the waste tires into reactor automatically,
seal the feeding inlet door tightly, which could save labor and
time.
b. Heat the reactor by burning the following fuel material: coal,
wood, natural gas, or fuel oil in the combustion system. The
reactor will be heated slowly, when the temperature reaches
around **0 degree Celsius, the oil gas will be formed.
c. After processed by huayin waste tire recycling pyrolysis
plant, the oil gas will go to the cooling system to be liquefied.
The gas which can not be liquefied under normal pressure will be
designed to go back to combustion system through safety device
instead of the fuel material to burn the reactor, which is
environmental friendly and can save you much energy.
d. After finishing oil collecting, the temperature of reactor
will be down, while, carbon black can be discharged automatically
at the same time.
e. when the temperature falls down to **0 degree Celsius, workers
can open the door of reactor to discharge the steel wire.
f. Start another batch working.
Benefit analysis of producing 1 ton crude oil
Waste plastics to product crude oil as an example
The price of waste plastics: **0RMB/T The average oil
rate:*8%
1ton of crude oil feedstock costs: (1÷*8%) ×**0=**5RMB
Coal costs: 0.4T **0RMB/T=**0RMB
Cost of electricity: **0RMB
Labor costs: 4 ×*0= **0RMB
Crude oil market price: ***0RMB/T
The production of one ton of crude oil profits: *******5 ***0
*******0=***5RMB
Country: | China |
Model No: | - |
FOB Price: | Get Latest Price |
Place of Origin: | - |
Price for Minimum Order: | - |
Minimum Order Quantity: | - |
Packaging Detail: | - |
Delivery Time: | - |
Supplying Ability: | - |
Payment Type: | - |
Product Group : | - |