HY-966 Silicone rubber for trademark

Product Description

Usage: Trademark of jeans, shoes, and toys. Description: 　　 　　The series of silicone rubber is divided into dispensing type HY***6 and coating type HY***7. They can not only be fabricated into trademarks independently, but also be fabricated into trademarks through cloth pressing and leather pressing. 　　HY***6A/HY***6B dispensing type trademark silicone rubber belongs to liquid addition cure system. The amount of the curing agent can be *0% and can also be adjusted to the mixing proportion of 1 : 1. The curing agent is two-component high-strength liquid silicone rubber made of basic compound, cross-linking agent, catalyst, padding and additive. Those materials do not contain heavy metal and aroma solvent, hence, it's not harmful to human body. Standard Datasheet: Item no. HY***6 HY***7 Component A B A B Appearance Transparent Transparent Transparent Transparent Mix ratio (%) *0 1 *0 1 Viscosity (cs) ≥****0 ≥****0 Pot life (Hrs) **1.5 **1.5 Curing time (Hrs) ****6 ****6 Elongation (%) ≥**0 ≥**0 Tear strength (KN/mm) ≥*5 ≥*0 Hardness (A°) Hardness can be adjusted according to the requirements of customers (****8 A°) Typical curing Condition: 　　**0℃×5mins, prolong or shorten the curing time appropriately according to the thickness and size of the product during actual use. Using Instructions: 　　The mixing proportion of HY***6A and HY***6B is *0:1. Mix component A and component B sufficiently and evenly according to the mixing proportion before use. The process of vacuum-pumping is also needed. Note: 　　The series of products must not be in contact with organisms like N, P, S, etc., ionic compounds like Hg, Bi, As, etc., and alkynes, vinyl compounds, etc. to avoid the situation at the products can not be cured due to platinum catalyst poisoning. The products particularly can not be in contact with PVC which contains lead causing catalyst poisoning. Some organic pigment also can slow down the curing time or cause uncured . 　　After HY***6A