Hydropower Turbine - Francis Type Water Turbine

Product Description

Francis turbines can be designed for a wide range of heads and flows and are the most common water turbine in use today. The Francis turbine has the characteristics of simple structure, small size, low cost, high efficiency at full capacity (typically over *0%), stable in running, applicable to a wide range of water heads.

The Francis turbine is a type of reaction turbine, a category of turbine in which the working fluid comes to the turbine under immense pressure and the energy is extracted by the turbine blades from the working fluid. A Francis turbine consists of the following main parts: Spiral Casing, Guide or Stay Vanes, Runner Blades, Draft tube, etc...

Francis turbines are almost always mounted with the shaft vertical to keep water away from the attached generator and to facilitate installation and maintenance access to it and the turbine.

Application scope of heads: *0m ~ **0m
Runner diameters: 1.0 m ~ *0.0m
Installable capacity: **0KW ~ *****0KW
Specific ratio speed: *0 ~ **0

As a leading manufacturer and one-stop supplier of Hydropower Equipment for Hydroelectric Power Plants and Automation Systems for Power Stations or Power Grid, Addnew specialize in designing, manufacturing and supplying the following high quality products, services and tailor-made total solutions: 1) Hydro Turbines, Generators, Electromechanical Equipment, Auxiliary Equipment and Engineering Services for any new or existing Hydroelectric Power Plants (unit capacity below **0MW); 2) Control Systems, Monitoring or Supervision Systems, Protection Systems, Communication Systems and Automation Systems for Power Stations and Power Grids of all kinds.

For more than *6 years, Addnew have been customizing effective solutions for "Smarter and Clean Power" with the following proven supreme quality and reasonably priced products, services and tailor-made total solutions:

> Hydro Turbines and Governors (Manual or PID with PLC) including Francis type, Kaplan type, Pelton type, Tubular type (Bulb Turbines, Pit Turbines, etc. ), Inclined-jet type, etc.;
> Hydro Generators of horizontal or vertical types, Excitation Systems, etc.;
> Turbine Governors including Manual type or PID with PLC type;
> Hydro Mechanic Equipment such as penstocks, speed adjusters, valves, sluice gates, cranes, trash-racks, etc.;
> Station Auxiliary Equipment like watering or draining systems, air & oil systems, fire protection systems, etc...