Insulation Piercing Connectors PCTseries

Product Description

PRODUCT DESCRIPTION:
Purpose of Insulation piercing connectors(IPC) is to connect main and one(PC*3),two(PC*4) tap conducor's of section,how is written on IPC body.Type without letter B serves to connect isolated conductors,with letter B bare conductors.IPC for one tap conductor is equipped with cable termination cap PCEC*6/**0, for two output wires-no cap.
IPC consists from two glass-fiber reinforced plastic parts,which are fited with two brass tinned teeth's,which are coated with UV-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt,nut and pinch fixation segment.The terminals marked T are equipped with tear head. The lower part of the clamp is designed to be hold by the key *7 and the ventilation chamber,providing optimal ventilation of IPC.
Product can be also used as tap connector inside low boltage boxes.
PRODUCT RANGE:
PCT*3 **0/**0 RE/RM,isolated ****0mm /isolated ****0 mm,Cu/Al.
PCT*3C **0/*0 RE/RM,isolated/bare 1.***0mm / isolated/bare ****0 mm,Cu/Al.
PCT*3C *0/*5 RE/RM, isolated ***0mm / isolated ***5 mm,Cu/Al.
PCT*4 **0/**0 RE/RM, isolated ****0mm / isolated ****0 mm,Cu/Al.
PCT*4 **0/**0 RE/RM, isolated *****0mm / isolated *****0 mm,Cu/AL
PCT*3B **0/**0 RE/RM, bare ****0mm / isolated ****0 mm , Cu/Al.
PCT*3CB **0/*0 RE/RM, isolated/bare 1.***0mm / isolated/bare ****0 mm , Cu/Al.
PCT*3C *0/*5 RE/RM ,bare ***0mm / isolated ***5 mm , Cu/Al.

PCT*3C **5/**5 
PCT*4B **0/**0 RE/RM, bare ****0mm / isolated ****0 mm , Cu/Al.
PCT*4B **0/**0 RE/RM, bare *****0mm / isolated *****0 mm , Cu/Al.
PCT*3FJ *5/*0 RE/RM,isolated ***5mm /isolated 1.***0 mm,
PCT*3FJ **0/*5 RE/RM,isolated *****0mm /isolated 2.5(6)**5 mm,
PCT*3FJ **5/*5 RE/RM,isolated *****5mm /isolated 2.5(6)**5 mm,
PCT*3FJ **5/**0 RE/RM,isolated *****5mm /isolated *****0mm,
PCT*3FJ **0/*5 RE/RM, isolated *****0mm /isolated ****5mm,
PCT*3FJ **0/**0 RE/RM, isolated *****0mm /isolated*****0mm,
PCT*3FJ **0/**0 RE/RM, isolated *****0mm /isolated *****0mm,
Stainless steel bolt,washer can be required. 
USED MATERIALS:
UV&fire resistant PA*6,PVC,dacromet or H.D.G(optional)finished steel,tinned copper.
VARIANTS:
The product is manufactured and supplied in modification's as is showed upwards in PRODUCT RANGE.
STORANGE AND TRANSPORT:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.