JZ-5T Waste Tire Pyrolysis Machine

Product Description

The whole process should be within **0 centigrades and maximum pressure is 0.*4 MPa.

 1. First, feed the raw material into the reactor, the raw material includes waste plastic, waste rubber, waste tyres. You can use the manpower and the belt conveyer to feed, if u uses the belt conveyer, it reduces the manpower and time, it's high effective.
2. When it begins to burn, the raw material begins to decompose, at the same time, it produces smoke, and the smoke gets through the waste gas pipe into the desulfurization deduster, it begins the first removing, if the fuel is coal, it burns and produce the sulfur, when the sulfur gets in, meets with the alcalescent water, they neutralize, then removes the sulfur, and the dust in the smoke gets down the water,and remove the dust if not,the smoke gets into the water-film cyclone ,because of the function of the centrifugal force, the water becomes vapor, and the dust getsdown the water. Then it gets environment protective and energy conservation.

3. When it is about **0 centigrades, it produces the oil gas, it gets through the oil pipe into the gas separate; it’s for the first time depositing. And the oil will be clean,if not, it gets into the depositing tank, the heavy oil gets down, the clean oil gets intothe cooling pool, and cool down, let the oil become liquid, then the oil gets into the oil tank.

4. Some exhaust gas with the component such as the CH4, it can't be liquified at the normal temperature and pressure,so it goes into the waste gas recycle system,then the furnace for burning ,not only energy saving, but also environmental protecting