Kill Manifold

Product Description

China Far Eastern Drilling Spare Parts (Industry) Co.,Ltdis an innovative manufacturer and distributor of Kill Manifold.

1. Application
In case of increase in well head pressure, the manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow down lines connected to the kill manifold, the increasing well head pressure also can be released directly for bottom hole pressure release, or water and extinguishing agent can be injected into the well by means of the kill manifold. The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore through themselves, but do not allow any backflow so as to perform the kill operation or other operations.
2. Structure
The manifold consists of check valves, gate vales, pressure gauges and pipelines. The one end of the kill manifold is connected to the drilling spool and the other end is connected to the pump. The manifold and choke manifold are both designed to API *6C and can be used together. The  manifold is available from *4MPa, *1MPa, *5MPa and *0MPa pressure ratings.
3. Operating Requirements
(1) Working pressure of all pipelines, gate valves and check valves shall be compatible with that of the BOP stack used.
(2) The manifold is not intended to be used as common lines for pouring drilling fluid.

We process our Kill ManifoldStrictly according to API standard and ISO********0 standard, for which good quality and good prices can be assured to you.If you have any interest in our products, please contact us offer.machinery(at)gmail(dot)com