Magnetic Stripe Reader ( MSRv007)

Product Description

Features details

3 track reader - Reads all three tracks of the magnetic cards. The reader exceeds the industry’s standard and supports *5 to **0bpi density on every track. Swiping speed can vary from as low as 3ips (7.*2cm/s) to as high as **0ips (**4 cm/s).

Reads interrupted swipes in both directions - When a swipe is interrupted, the data that has been read is saved and analyzed by a highly efficient algorithm that is able to correctly interpret and display the data.
 

Ultra-compact design - The reader has been designed to be as small as possible.

Smallest size available in the industry today - It is one of the smallest magnetic stripe reader available today ( 4 x 5 x *5mm ).

High noise immunity - The reader can withstand and read correctly near noisy PC monitors, cell phones, switching power supplies, etc.

High performance decoding - Reads badly damaged cards.

Automatic Gain Control (AGC) - Reads cards from *0% - **0% of International Standards Organization (ISO) ***1 amplitude standard.

Fully encrypted - The data is stored and transferred encrypted with Advanced Encryption Standard algorithm which is also used by U.S. government to protect top secret information.

Stores up to ****0 cards - It features ***0kb of memory and the cards are compressed. For cards that contain only Track 2 there is enough memory to store ****0 swipes. When all tracks are used and are fully written, there is enough memory to store more than ***0 swipes.

Ultra low power consumption - Less than 0.1mA when idle and less than 0.8mA when a card is being swiped. This means that on a single charge of *0mA battery will run for *6 days or read *****0 cards.

Low voltage operation - Requires 2.7 to 3.7 volts which makes it ideal to run on a single cell Li-Ion or LiPolimer rechargeable batteries. It will work with any power supply as long as the power requirements are met.

Every swipe is timestamped - Has a highly calibrated internal clock and will write the date and time when each swipe has been read.

Reads all magnetic cards - Interprets all standards and allows the user to define their own card format

Industrial operation range - The operation range of this unit is from **0°C to *5°C therefore it will operate in any kind of weather.

USB Interface - It is communicating through USB, interface which is fast and available in almost all the computers used today.

Easy to use - The software that comes with this reader is a graphic user interface for Windows. There are just 3 steps you need to do: Select device, Log In and Download.

Software Information

This reader works with CRFSuite which is a very friendly user interface that runs on Windows XP, Windows Vista and Windows 7.

Watch a demonstration here.

View screenshots of CRFSuite 3.1.0 here.

Warranty information

This product is guaranteed to be free from defects in materials and workmanship for *0 days since the date of purchase. CardReaderFactory will, without charge, repair or replace at our option, any device returned for warranty work and found to be defective by us.

Certifications

Legal

This product is intended for legal use only. Please check your local laws before purchasing.

The buyer understands that none of our items are for illegal use; that he/she will safeguard the use and distribution of these devices and make every effort to prevent illegal use from occurring.

We are not and will not sell our products if we know or suspect that they will be used for unlawful purposes. Please refer to the full terms and conditions.

About the demo mode

This device can be purchased for a lower price in the "demo mode". It can be upgraded later to work at full capacity by purchasing an electronic upgrade code from here.

Limitations

If bought in demo mode the device will have following limitations:

After *0 swipes have been reached, the device will stop reading. The device will resume normal operation only after the memory has been erased.

While on battery, the device will only read cards for *0 minutes. In order to resume normal operation, the user has to disconnect the battery and plug it back in.

Please note that none of these limitations are permanent. After the memory is erased or after the power has been cycled, the device will resume normal operation.