manual silicone rubber

Product Description

Applications of manual mold silicone rubber

Manual mold design silicone rubber is mainly applicable to manual mold design of manual mold, PVC plastic molds, cement product molds, low melting point alloy molds, alloy toy craftworks, plastic toys craftworks, gifts and stationery, duplication of large statues and cultural relics, shoe sole mold fabrication, pad printing allocation, antivibration of electronic equipments etc.

Features of manual mold silicone rubber

Manual mold silicon rubber has the features of good elasticity, non-deformation, high temperature resistance, good tensile strength and low shrinkage. The reproduction times are determined by the requirements of customers.

Operationsof manualmold silicone rubber 

Firstly, prepare the model mold or the product to be duplicated, take certain amount of silicon rubber, add **3% solid curing agent, and mix evenly. Then the mixed silicone rubber is ready for use. One mold can be solidified and formed in **3 hours.

(Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%**0% silicon oil can be added to soften the mold for easy demolding.)

Frequently asked questions for Silicon rubber for manual mold

What should we do when the air bubbles appeared in the process of mold making ?

To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to deair. If without a vacuum pumping machine, reduce the amount of the curing agent properly. For example, change the mixing ratio of the silicon rubber and the curing agent from former 4% to 1%*2%. In this way, the pre-crosslinking time of silicon rubber will slow down, so the air in the mold will be eliminated gradually to reduce the air bubbles.