Medical Orthopedic Polyester Casting Tape

Product Description

Medical Orthopedic Polyester Casting Tape 1. Description The medical orthopedic polyester casting tape is made of polyester soaked with polyurethane,it's a ideal succedaneum of plaster of paris,having lots of advantages over plaster of paris. 2. Features: 1)Safe and Confortable It has small contractibility after becoming dried,will not cause discomfort of tickle,tightness and burn to the skin,not like plaster of paris which generates heat release after being wetted by water. 2)High air permeability It can avoid hot flash and pruritus to skin because of its good performance in air permeability 3)Very short induration time It takes about *0 minutes for the full induration of casting tape,but *4 hours for plaster of paris. 4)High hardness and light weight It's *0 times harder than plaster of paris after induration,5 times lighter and 3 times thinner than plaster of paris. 5)Excellent X-ray penetration There is no need to remove the casting tape to take a x-ray photo,it's easy to see the intention and recovery status of wound clearly by x-ray. 6)Superior waterproofness Its surface will be smooth after induration,its water absorption is *5% lower than the plaster of paris',it can contact the water directly,you can wear it to take a bath or SPA. 7)Easy to use You can soak it in water of normal temperature for **3 seconds and shove it for **3 times first,then wear it on the wound,or wear it first and then spray water on it. 8)Good plasticity It can be bended freely,suitable for many parts of the body. 3.Specification: 1)Material:polyester+ polyurethane 2)Color:white/blue/green/red/yellow,purple,orange,etc. 3)Width:2'',3'',4'',5'',6'' or as your requests 4)Length:2.7m,3.6m 4. How To Use: 1)Put on gloves and choose the casting tape of suitable size 2)Use cotton coil or cotton slipcover as pad on the surgery position 3)Open the package,take the casting tape out and soak it in water of normal temperature for **3 seconds and shove it for **3 times,take it out of the water and shove excess water out. 4)Wind the casting tape and adjust the tightness as needs,wind **4 layers on non-weigh-bearing part and **6 layers on weight-bearing part. 5)Finish the winding and shaping within **5 minutes induration time.it can bear weight after *0 minutes 6)Remove it by electric plaster saw. 5. Package: 1pcs/bag,*0bags/box,*2boxes/carton or as your requirements 6. Advantages: 1)Certificates:CE/FDA/ISO****5/ISO***1 2) Famous Trademark Of China 3)Small orders and OEM services available.