NAPKIN PRODUCTION MACHINE, SIZES 24*24 TO 40*40 - NAPKIN 2500

Product Description

NAPKIN ***0
 
NAPKIN PRODUCTION MACHINE, SIZES *4**4 TO *0**0,
WITH SET OF DOUBLE HEADS, with operational speed of  **0 meter/minute
( Average productivity ***0 napkins/minute , consists of the size of the produced napkin)
Possibility to produce all napkin sizes on the same machine.
The size changes can be made in minimal time, with the placing of the corresponding heads (folding cylinders)
 
Technical characteristics
1. Feed  roll  - max. width **0mm  &  max. diameter ***0mm 
2. One set of double heads (folding cylinders) for napkin production,
 with the advantage of move and place again in  very little time.
3. one position to place heads (folding cylinders)
4.Controller for the adjustment of the speed for a smooth starting and stop of the machine
& possibility of working step by step.
5.Paper flow checked by electronic system.
6.Electronic production counter.
7. Two  positions to add embossing units with paper or metal, pneumatic adjusted
8.One embossing with paper or metal (continuous drawing) , pneumatic adjusted,
   and possible to add another two embossing units.
9. Napkin folding at 1 / 4
*0. Paper cutting system, that cuts the paper in the middle
*1. System that drives the paper to the heads.
*3.  Ribbon saw cutting of the napkin
*4. Manual ribbon saw grid.
*5. paper unwinding with belt. ,
      for feeding roll with **0mm width
*6. Fully equipped central board.
*7. 6,.1 kw total power
                                                                       
*the mentioned machine, consists of 2 parts.
Between these parts you can put machine parts for printing or P.T.P. part.
 
 
Extra                                                                                                                                                                                     
1. extra set of heads at the size of your choice             
2. Possibility to add until 2 printing units with 2 printing systems /unit
    You can put a total of 4 printing units
3. Sculpture of the embossing axles with drawings of your choice.
4. Possibility to place embossing units with border instead of continuous drawing
5. Napkin folding at 1 / 8       
6. Option to add a PTP unit for the production of PTP  napkins.
7.Possibility of adding a second unwinding unit.