● Edge-lighting of transparent or diffused materials.
● Path & Contour Marking.
● Emergency / rescue signs.
● To couple light into transparent or diffused glass .
● Widespread use in accessorial lights for indoors, medical,
landscape,
Safety Information
■The SMD light ribbon itself and all its components may no be
mechanically stressed. Assembly must not damage or destroy
conducting paths on the circuit board.
■ Installation of LED light ribbon (with power supplies) needs
to be comply with all applicable electrical and safety
standards. Only qualified personnel should be allowed to
perform installations. Correct electrical polarity needs to be
observed. Wrong polarity may destroy the ribbon.
■ Parallel connection is highly recommended as safe electrical
operation mode.
■ Serial connection is not recommended. Unbalanced voltage drop
can cause hazardous overload and damage the ribbon.
■ Please ensure that the power supply is of adequate power to
operate the total load.
■ When mounting on metallic or otherwise conductive surfaces,
there needs to be an electrical insulated points between ribbon
and the mounting surface.
■ Please pay attention to standard ESD precautions when
installing the ribbon.
■ Damaged by corrosion will not be honored as a materials
defect claim. It is the user’s responsibility to provide
suitable protection against corrosive agents such as moisture
and condensation and other harmful elements.
