Orthopedic Medical Splint for Hospital

Product Description

Medical Orthopedic Fiberglass Splint

Introduction:

Ansen Orthopedic Fiberglass Splint is comprised of 8 layers of a knitted polyester/fiberglass fabric, impregnated with polyurethane resin. It is covered by air and moisture permeable non-woven fabric on both sides, which serves as padding. Applied to common orthopedic splints.

Products Materials:

Polyester or fiberglass fabric, Polyurethane

 

Features:

v Meet CE and FDA.

v Easy operating.

v High strength and light weight.

v Good air-permeability.

v Good X-ray radiolucent.

v Eco-friendly material.

v Good conformability and mold-ability.

Operation:

1. Select proper size of splint according to different parts of body, no need to wear gloves for doctors.

2. Open the package, immerse the splint in room temperature water (****4'C) for **6 seconds and squeeze it  **3 times to complete penetration of water into the body of the splint. The higher the water temperature is the faster splint hardens.

3. Take it out and squeeze or wipe out excess water by using dry towel.

4. Use the splint to cover the fixed part and wrap it by gauze bandage or elastic bandage to secure and mold it  freely.

5. After water soak the splint begins to solidify in **5 minutes and can bear weight enough in *0 minutes.

   Generally the operation will be finished in 3 minutes. It needs to be avoided excessive action within *0 minutes to be made the

  best stiffness before fully hardened.

6. Splint can be removed with common scissors.

Packing & Storage:

  Be careful not to break the packaging

  Storage at room temperature

  Shelf-life: 2 years