Orthopedic splint

Product Description

Kangda® splint-fiberglass consists of the upper and lower side of the non-woven fabrics and intermediate multilayer knitted fiberglass fabric that impregnated with a water-activated polyurethane resin. Kangda® splint-fiberglass has these distinctive features: high strength, light weight, short hardening time, good X-ray translucency, good air permeability, easy operation, comfortable and safe. Kangda® splint-fiberglass products apply to general plastic surgery for fixing the fracture parts and swollen and wounded joints, supporting and fixing sprained ligaments and muscular tissue. It is ideal and upgrade product substitute for traditional plaster bandages. Application Methods: 1. Choose appropriate size according to the injured area. 2. After opening the pouch(Long roll type of splint cut the appropriate length as needed and immediately seal the end the splint with a special clip), immerse the splint in room temperature water (*1~*4℃) for **6 seconds and squeeze it **3 times to make it fully saturated. 3. After taking out the splint from water, squeeze or use dry towel to remove the redundant water. 4. Put the splint on the parts that needs fixing, and wrap it with common gauze bandage or elastic bandage. To maintain proper tension is very important. If it is too tight, the blood circulation of the affected region will be disturbed; if it is too loose, the treatment effect will be affected. 5. The splint can be molded after wrapping to make sure close fit with limbs. 6. The operation time is generally within 3 minutes. Setting time is about **5 minutes and achieves functional strength in *0 minutes. Make sure the patient not to move the affected region before the product is fully hardened. 7. Just cut the gauze bandage or elastic bandage, the splint will be dismantled.