PIPE FITTING (ELBOW, TEE, CROSS,CAP, REDUCER) FLANGE (wn, so, bl ) rtj,rf

Product Description

 
 
  MIKE HU
       ***-SALES MANAGER
 MOBILE:**********0

ASA forged flanges
A**5. Forged accesorie for pipes.
A**2. Specification for forged flanges in alloyed or stainless steel for pipes.
WELDING NECK, SOCKET WELD, SLIP ON AND BLIND.
Norm for B. *6.5, BS ***3, MSS SP C*4 and API **5.
Pressures: **0, **0, **0, **0, ***0, and ***0 pounds.
Schedules: Sch. 5S, *0S, *0, *0, *0, *0S, *0, STD, *0, *0, XS, **0, **0, **0, **0, and XXS.
Lengths from 1/4" up to *0".
DIN Flanges
DIN ***3 and ***6 flanges.
Welding neck flanges from DIN ***0 to DIN ***8.
Collar flanges DIN ***1 and ***2.
Blind flanges ***7.
Materials ST**7, C *3.3/8, stainless steel and alloyed.
Pressures: From PN*6 to PN***0.
Schedules. From 1/2" to *0".
DIN Curves.
DIN ***5.
 
 
 
 
 
 
 
 
 
 
 
 
CARBON STEEL SEAMLESS PIPE
Cold drawn Pipe  A**6 GR.B/API 5L GR.B 
Hot-rolled Pipe  A**6 GR.B/API 5L GR.B 
SIZE: 3  TO  8 
Hot-expanded Pipe A**6 GR.B/API 5L GR.B 
SIZE: *0  TO *2 
Others buy from friends mill .
Thickness ：STD,  SCH*0，SCH*0 ，SCHXXS etc
Length   ：Randon Length，fixed length
Bevel    ： Bevel 2&2 above or Plain
Standard  ：GB,ASTM,API,DIN
Advantage Products ：
Heavy Wall Thickness Seamless Steel Pipe
Size  ：OD**1.3MM-OD**9.6MM
Thickness ：*9.*5MM**9.*4MM
Length   ：CONFIRM BY SIZE AND THICKNESS
CARBON STEEL BUTT WELD PIPE FITTING
Elbow（*5Deg,*0Deg,L/R,S/R）
Tee （Straight & Reducing）
Reducer（Concentric&Eccentric）
Flange (WN, SO,BL)
Size: 1/2 TO *4 ( seamless)
Thickness：STD, SCH*0,SCH*0 ,XXS etc
Bevel：2&2 above
Standard  ：GB, ASTM, ASME,ANSI
We meet the customer's special requirements, according to drawing production.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Seamless and Welded Butt Weld Fittings from a full range of Carbon, Stainless & Alloy seamless pipe and Plate in the following product size ranges.
Long Radius Elbows in diameters from 1/2" to *4" in thicknesses up to SCH**0
Short Radius Elbows in diameters from 1/2" to *4" in thicknesses up to SCH**0
Reducers both eccentric and concentric in diameters from 1/2" to *6" in thicknesses up to SCH**0
Caps in diameters from 1/2" to *2" in thicknesses up to SCH**0
Tees in diameters from 1/2" to *6" in thicknesses up to SCH**0
Lap End in diameters from 1/2" to *2" in thicknesses up to SCH*0
And The Welded Fittings in diameters up to *8" in thicknesses up to SCH**0.
3D Bends in diameters from *6" to *8" in thicknesses from 1/4" to 3"
Crosses & Laterals in diameters from 2" to *2" in thicknesses from 1/4" to 6"
B.W. Accesories in carbon steel and alloyed.
A**4. Pipe is accesories for high to moderate temperature orders required.
A**0. Pipe is accesories for low temperatures orders required in all its grades.
A**0. Pipe is accesories very little alloyed and with a high elastic limit.
B.W. accesories in stainless steel
A**3. Pipe is accesories in **4L***6L stainless steel.
B.W. Elbows from *5, *0up to **0, short or long radius.
B.W. Tes, reduced or all the same ones.
B.W. Excentric and concentric reductions.
B.W. Caps.
ANSI NORM B *6.9
Lengths form1/2" up to *8".
For the production of our coil unit,we adopt two processes as Medium Frequency induction heating and cold bending.The bend-diameter and spacing can accoding the clients' requirements.
Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,Titanium-nickel alloy, copper-aluminium,etc.
Production specification: DN*5 DN**0
Schedule ranges: Sch*0 Sch**0
Manifold is one of the typical products which researched and developed by ourselves. To manufacture the bend and straight pipes,we all adopt the process of dydraulic hot-acrosomal towing.The geometric dimensions are accurate,the height of the bracket is high,and the wall thickness is grid.
Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,etc.
Production specification: DN**0 DN***0
Schedule ranges: Sch*0 Sch**0
Bends of our company are adopted the manufacturial process of Medium Frequency induction heated, water colded forming.
Main materials: carbon steel, low temperature steel, alloy steel, stainless steel, ambisense steel, two phases steel,
Titanium-nickel alloy, copper-aluminium,etc.
Production specification: DN*0 DN**0
Schedule ranges: Sch*0 -Sch**0
Pipes & Tubes Seamless, EFW, ERW, DSAW and Forged
Sizes available: 1/8" through to *4" Nominal Bore.
Wall thickness:1mm through to 4".
Material Grades :
Stainless Steel A**2 **4/L, **0, **6/L, **1/H, **7/H, **0, **0, **4L.
Carbon Steel A**6Gr.B/C, A**9, API 5L Gr.B.
Dimensions :
All pipe is made and controlled to the relevant standards such as:
ASME, ASTM, BS, DIN/WERKSTOFFE.