Pressure Transmitter (PY3051)

PY***1 intelligent pressure transmitter is used for measuring the pressure of liquid, gas or steam. ***0mA output with Hart communication, can perform communication, setting, monitoring via PC hart communication software, Hart**5 communicator
Performance Specification:

Reference Conditions: Indoor temperature: *5° C, relative humidity: *5%, without range drift and linear output
Pressure Range: ***0~**0PA, 0~*1MPa, please refer to transmitter selection guide.
Linear: 0.**5%
Repeatability: 0.*5%
Hysteresis: 0.*5%
Temperature Compensation: **0~*0° C
Response Time: Depending on measuring range and ratio: 0.1~1.6 second, additional adjustable constant: 0~*2 second
Long-term Stability: 0.1%F. S/year
Temperature Factor: 0.**5%F. S/*0° C
Installation Position Effect: For zero approx. **0Paxsin<(<=angle difference to the vertical position, can be calibrated out, no effect to range)

Product Output:

Output Signal: HART FSK protocol 4~*0mA linearity output or Square root output
Alarming current: Min: 3.8mA Max: *0.8mA
Loading Capacity: R &#x***4; (Us-Umin), maxKΩ
I max =*0~*2.5mA can configure
Us = power supply voltage
Umin = min. Power supply voltage
Max. Power supply voltage: *5VDC
Min. Power supply voltage: *2.5VDC (Model with backlit)
Min load of digital communication > **0Ω
Communications Distance: Max. 1.5km when using shield many twist wire; Communications distance varies with cable type, length of the cable can be determined according to the following formula
L=(***6)/(R)-(CF*****0)/CL=length(m) or ft**0.*2psi/**1.5kPa