Quality Mutifunction Timegrapher1000/1500/1900/2000/3000/5000/6000 Watch testing machine

Product Description

Timegrapher,watch tester,watch tooling,watch timing machine, watch testing Machine MTG****0

I.Function:



1. The NTimegrapher NO. ***0 is a precise mechanical watches test instrument, it is used for multi-testing by watch manufacturers and watch technician.

2. The frequency diagram of the watch can be displayed in the LCD screen.

3. According to different watches, the instrument will automatically adjust optimal signal level during testing.

4. The instrument will automatically calculate the rate, amplitude, beat error, and display them by data in real time.

5. For the conventional beat, the instrument can automatically response; for the special beat, can manually select.

6. The sampling period can selected by 2 seconds, 4 seconds, 6 seconds, 8 seconds, *0 seconds, *0 seconds, *0 seconds, *0 seconds, and the average of corresponding period will be regard as the precise value of the watch.

7. Six kinds of testing position can be adjusted, and the simulation sound can be play in the speaker or mute

II.Parameter:

Beat Numbers (Frequency Numbers)

1.Automatic

The following beat numbers are selected by automatic selection mode:

****0,****0,****0,****0,****0,****0,****0,****0,****0

(If the tested beat is not in automatically selection, the instrument will display the closest beat number, but the test result is not correct. At this time, use the manual mode to select the relative beat.)

2.Manual selection

It can selected out the beat number that Automatic select can not identify and rare beat number.

The following beat are selected by Manual selection mode:

***0,***0,***0,***0,***0,***0,***0,***0,****0,****0,****0,****2,****0,****0,****0,

****0,****0,****0,****0,****0,****0,****0,****0,****0,****0,****0,****0,****0,****0,

****0,****0,****0,****0,****6,****8,****0,****6,****7,****0,****9,****4,****2,****0

****0,****0,****2,****4,****0,****1,****6,****0,****0,****0,****0,*****4,****0

Lift Angle

The lift angle is *2° for many common movements, therefore the lift angle value of instrument for factory is set to *2°. This value is required to calculate the amplitude and must be selected according to the watch movement. The lift angle can be set to between *0°and *0°



Period

The measuring period selectable:2s,4s,8s,*0s,*0s,*0s,*0s

Use to recalculate the average values of the test result.

Attention please:

Price does not include VAT or Tax, buyer need to pay for the tax. If buyer want us to include VAT, please contact us before you make the paymet. 



You contact is highly welcome.