RadioLink 6CH radio T6EHP-S for heli and GYRO GY100-S sets

Product Description

Radio:TEHP-S
Specification 
Size：*7cm*8.5cm**0cm
Weight： 0.*5kg
Transmitting on 2.4G band
Modulation: FHSS
Power supply: 9.6V Ni-Cd battery or *2V alkaline battery
Current drain: *7mA(Energy Saving)
Trim: Mechanical
No EXPO function
Receiver: R7EH
R7F narrow band, 2.4GHZ 7 channel receiver
Power requirement: 4.8V~6V
Current drain: 9.5mA & 4.8V
Standard Channel displays
Channel 1: Aileron; Channel 2: Elevator; Channel 3: Throttle; Channel 4: Rudder
Brief Introduction
1） Transmitter hops spectrum while powering on
Transmitter will detect whether the current spectrum channel was occupied when its power on, and it will hop to the next one until where its not occupied. The receiver will search and match with the transmitter which has the same identity code.
2） Code matches wirelessly
Each transmitter has an unique identity code of its own, the receiver will search and bind with the nearest transmitter when press the code matching on it. There is no need to match again in future use once its matching successfully.
3） High anti-interference capability
Adopt FHSS technology makes our products have excellent anti-interference capability. And helps the models always be in control easily.
4） High suppression ratio of Adjacent Channels
5） Fully comply with FCC&CE standards
6） Stable RF range
With FHSS technology, its control range reaches **0 meters on ground and **0 meters in air.
7） Flexible throttle hand change
8） LCD screen, manual programming is enable. Including settings about D/R, SERVO REVERSING, EXPO, EPA, TRIM, N-TH, N-PI, I-TH, I-PI, GYRO, SWSH and etc.
9） Low voltage warning function
*0）Trainer cable, power charging jack.

Gyro:GY***-S
The GY***-S is a high performance, compact, light weight AVCS (Angular Vector Control System) gyro developed for model helicopters. Because the sensor and control circuit are integrated, it is simple to install. Futaba S***7 high-speed digital servo for gyro use is recommended.
Specification
GY***-S Ratings (Integrated sensor type AVCS rate gyro)
• Control system: Digital advanced PI (Proportional Integration) control
• Gyro sensor: SMM (Silicon Micro Machine) system vibration gyro
• Operating voltage: *4 to *6VDC
• Operating temperature range: **0°C to **5°C
• Dimensions: *1 x *2 x *5.5mm
• Weight: 9.7g (including connector)
 Brief Introduction
• Functions:
Gyro operation direction switch, DS mode switch, Control sense trimmer, Limit trimmer, Remote gain control, AVCS/normal mode switching.
• Dual sense adjustment：
You can adjust sense on transmitter or gyro.
• Precise/Linear：
Wide gyro rate range from 0.5degree/s to **0degree/s, offer faster, smoother response and consistent pirouette rates; Steady head-lock while hovering, which prevents tail from deviating anytime.
• Stable control：
Easy to get stable sensitivity, when you rotate helicopter fast, you can stop it immediately without any trembling!
• Fast response:
　 Offering superior 2ms response time on DS mode. When you change the helicopter between raising and descending rapidly, you almost can not see any tail deviating.

Alex Chu
alex(at)radiolink.com.cn