Reactive power compensation reactor

Product Description

Reactive power compensation reactor is installed in the reactive compensation cabinet to limit switching current and operate over voltage, protecting the capacitor in the power factor correction system, absorbing harmonic current in the power grid, improving the voltage waveform in the system, reducing harmonic pollution, increasing the power factor and improving the quality of power network.

Technical parameters
1. Normal line voltage: **0V***0V
2. Compensation power: 6.****0Kvar
3. Reactance ratio: 5.*7%,7%,*4%
4. Overload capacity: 1.*5 times the load for long time security operation
5. linearity ≥ 0.*5Ln
6. Dielectric strength: winding-earth **0VAC/*0Hz/*0s no arcing or breakdown
7. Insulation resistance: winding-earth, cross-core screw rob - earth **0VDC, insulation resistance value ≥**0MΩ
8. Noise level < *5dB (The testing point's horizontal distance from transformer should be 1 metre.)
9, Protection degree: IP*0
*0. Insulation class: H
*1. Product standards: IEC**9:***7 Reactors
                             GBI******8 Reactor (EQV IEC**9:***7)


Application environment and conditions:
1, The altitude is not more than ***0 meters and if more than ***0 meters, derating is required.
2, Running temperature: *5 ℃-*0 ℃, relative humidity is less than *0%. 
3, Without harmful gas, inflammable, explosive and conductive dust around.