Reader Proximity Smart Contactless RFID Card Reader with Keypad

PCD***3 Proximity Card Reader with keypad

Type: EM-ID Card /**5KHz or PIN Opening Door Mode.(Mifare format /*3.*6MHz is option)

I. Introduce: Reader Proximity PCD***3:

When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data.

It has **0ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint.

But for Different ID card entering Proximity Area, Reader can do response continually and send out the data.

II.Specification: Smart Contactless RFID Card Reader with Keypad:

III. Notice: Keypad Smart Proximtiy Reader:

1:Confirm the electric voltage (DC*2V) and differentiate positive anode and cathode of    power supply. 

2:When external Power is used, make sure sharing the power with Controller Box or    using the same GND. 

3:When the distance between card reader and controller is more than *0m, please use    Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.