Ring FrameScaffolding System

Product Description

- The horizontal elements of this system are produced as “Pressed”.

- Its erection and demount is quick and easy.

- At the flange (frame ring) points where horizontal element and prop are connected, direct intersection mouth is opened on horizontal element.

- Connection can be achieved to the flange (frame ring) from eight directions.

- It can be used for different dimensions horizontally and vertically.

- It is generally used for facade scaffolding for indoor installation, decoration and restoration works. It can also be used as load-bearing (for light loads) under formworks having floor thickness of ****2 cm.

- It has the facility to conform to flanges on the props for any kind of facade design.

- The vertical and horizontal elements of the system are produced from TSE Certified standard pipes having the thickness of 3 mm and 2.5 mm respectively with the diameter of *8.3mm. The wedges have 7 mm thickness.

The elements constituting the system can optionally be:

• Painted with dipping,
• Painted with anodic oxidation paint
• Electro galvanized
• Hot-dip galvanized

Note: On condition that it is paid for, the systems can be painted in desired colors.

The elements constituting the system:

- Vertical element

- Horizontal element

- Lower universal jack and jack nut

- Upper universal jack and jack nut

- Coupler element

- Base jack

- Metal walk board

- Metal ladder

- Fixed bearer

- Adjustable bearer

- Console