scrap tires pyrolysis equipment

Product Description

   The whole pyrolysis system is composed by *3 parts, which are reactor ,transmission device,catalytic chamber,cooling tube,heavy tank ,oil-water separator,condenser,light oil tank,safety device,vacuum system,dedusting system,draft fan,chimmey.

The keys of pyrolysis machine are reactor and cooling system.

Reactor directly decides the machine's safety and service life. It is made by welded steel plate. So the quality of welding will have a direct impact on safety and service life. Therefore, we use automatic welding machine, X-rays detection and heating treatment which will not only guarantee the quality of welding but also greatly improve working efficiency.

For cooling systems, there are two steps. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are *7 pipes in one condenser. Diameter is *8mm for one small pipe. The heat exchanging area is about *3square meters for one condenser. So the total cooling area is *9 square meters, which will guarantee you a high oil yield.

vaccum system will guarantee no oil gas leak ,safety ,and environment protection and energy saving  and lower the temprature for pyrolysis and save fuel while continous feeding.

the main characteristic :

safety:

      1. we using auto welding machine to make the reactor,which can guarantee the quality of welding seam,avoid cracking and has a long life for about 8 years.

      2. professional heating treatment and x-ray detection chamber for welding seam .

      3. vacuum system to prevent oil gas be back to reactor causing accident.

      4. with professional thermometer , professiona pressure gauge and safety valve.

   5. It is dangerous to buning exhaust gas(C1 to C4) . In our process, it is transferred first through the safty device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

environment friendly:

      1.dedusting system to prevent gas and dust from coal burning

      2.the exhaust gas will be recycled for heating reactor ,no gas pollution

      3.well sealing on every junction parts to prevent gas leak,no smelly

longer life :

      use Q**5R special steel plate ,thickness *4mm. welding seam with auto welding and will get heating treatment and x-ray detection to extend the life of reactor to the most extend.

      the life will be 8 years

energy saving:

      1. well sealing for heating system ,no gas leak and saving fuel.

      2. the exhaust gas will be recycled for reactor heating .