Shunt

Product Description

Jingying Shunts are available for current ratings from 5 to *0, **0 amps and mili volt drops of *5 Milli volts. The shunts confirm to ISI standards IS ***8. Shunts consist of Manganese rods soldered or silver brazed to brass / copper end blocks. The shunts are artificially aged after manufacture and then tested on full load. ACCURACY: Class 1. OVERLOAD: Shunts are capable of withstanding temperatures up to **0C without any permanent alterations in physical or electrical properties. Overloads and faults which result in temperatures of this magnitude can be safely handled. All *5 Milli volt drop shunts of class 1, withstand the following overload requirements: 2 x rated current for 3 minutes. 4 x rated current for *0 seconds. *0 x rated current for 5 seconds. TEMPERATURE CO-EFFICIENT: 0.**2% per degree centigrade, above ambient temperature in still air, with free ventilation. Temperature not-exceeding **0°C at the center and *0°C at the ends.