Single tunnel greenhouse

Product Description

The basic requirements are 8 meters wide, *0 meters long, 1.8 meters high at the shoulder and 3 meters high at the top. The arch rod is2mm hot-dip galvanized pipe, the arch rod spacing is 1.0 meters, and the arch rod is inserted more than 0.4 meters into the soil. The material is hot-dip galvanized steel, and 3 longitudinal tie rods are designed to enhance the wind and pressure resistance. Longitudinal design 4 film slots (2 slots on each side). The skirt film is *0cm high, the top is fixed by pressing film groove, and the bottom is buried in soil to strengthen wind resistance and sealing; The second path is installed **0cm above the ground, and the roll film and skirt film repeat *0cm. 6 vertical rods are installed at the end; Every two arch between the installation of a film rope, increase the wind resistance, the four corners of the shed installed wind support, increase the stability of the shed. Each seat inserts the ground shed end face installation of 1 diaphragm two-sided sliding doors, the door specification is 1.8€š¬…¡¦1.4m, each seat has a total of 2 millimeters. The specifications vary depending on the location. whatsapp